517309
25
Zoom out
Zoom in
Previous page
1/78
Next page
Switching the flashgun on and off
To switch on the flashgun slide the main switch
to "BATT". The flash ready indicator "READY"
lights up as soon as flash readiness is established.
To switch off, slide the main switch to "OFF".
The HV position of the main switch and th exter-
nal power supply socket have no function!
Indication of maximum flash range - m or feet
Maximum flash ranges are indicated in position (D)
of the mecablitz LC display. The distance ranges
given are based on a reflection factor of 25% this
being the average degree of reflection for subjects
shot with flash. A much higher or lower degree of
reflection, when shooting subjects with a very high
or very low reflectivity, for example, may influence
the effective range of the mecablitz.
The maximum effective range of the mecablitz
depends on the ISO film speed, the focal length of
the lens or flash reflector position, and the aperture
set on the lens.
Accensione e spegnimento del flash
Per accendere il flash spostate l'interruttore principa-
le
nella posizione "BATT". Quando il flash è pronto,
si accende la spia di carica "READY" . Per spegne-
re il flash spostate l'interruttore principale
sulla
posizione "OFF".
La posizione "HV" dell'interruttore
principale
e la presa laterale per fonti di energia
esterne non hanno alcuna funzione.
Indicatore del campo di utilizzo - metri o piedi
Sul display LC del mecablitz appare l'indicatore del
campo di utilizzo in posizione (D). I valori visualizzati si
riferiscono ad un fattore di riflessione del 25%, che è il
grado medio di riflessione nei soggetti fotografati con il
flash. Discordanze consistenti nel grado di riflessione ,
ad esempio quando si fotografano soggetti con un gra-
do di riflessione molto alto o viceversa molto basso,
possono influenzare il campo di utilizzo del mecablitz!
Il campo di utilizzo del flash dipende dalla sensibilità
della pellicola ISO, dalla distanza focale dell'obietti-
vo o dalla posizione di riflessione del flash e dall'a-
pertura del diaframma impostata sull'obiettivo.
Conexión y Desconexión del flash
Para conectar poner el interruptor principal en la
posición "BATT". Si se ha alcanzado la disposición
de disparo entonces se ilumina la indicación de dis-
posición de disparo "READY"
. Para desconectar
poner el interruptor principal en la posición
"OFF". La posición HV del interruptor principal y
el conector lateral para corriente externa no realizan
ninguna función.
Indicación de alcance - m o pies
En el display LC del mecablitz aparece en la posición
(D) una indicación de alcance. Los valores indicados
corresponden al grado de reflexión del objeto de
toma de 25 %, y que coinciden con la mayoría de
situaciones de toma. Desviaciones grandes del gra-
do de reflexión, p.e. en objetos de mucho o poco
reflejo pueden influir en el alcance del mecablitz!
El alcance del flash depende de la sensibilidad ISO,
de la distancia focal del objetivo o del reflector del
flash y del diafragma ajustado en el objetivo.
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 40 AF-4 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 40 AF-4 M in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info