517309

Metz MECABLITZ 40 AF-4 M Manual

27
Zoom out
Zoom in
Previous page
1/78
Next page
Flash ranges are indicated only if the flashgun is
connected to the camera and if an exchange of
data has taken place (e.g. when the camera's
shutter release was tapped). If „UE“ apperars on
the flash unit`s LCD panel, correct flash exposu-
re is not possible. An arrow (--
m
) in the LCD
display indicates that the maximum flash range
hes been exceeded.
There will be no flash range indication when the
reflector is tilted.
In TTL mode, the mecablitz displays the permissible
distance range.The value on the left is the minimum
permissible shooting distance. A shorter distance
may result in overexposure. The value on the right is
the maximum effective range of the mecablitz. A
longer distance may result in underexposure.
The subject should be in the middle of the effective
range to give the electronic system sufficient leeway
for determining the required amount of light. An
adaptation to the individual shooting situation can
be achieved by changing the lens diaphragm.
In the manual mode (M and 1/16), the displayed
Il campo di utilizzo è indicato solo se il flash è col-
legato alla fotocamera e se si è verificato uno
scambio di dati (ad es. premendo leggermente il
pulsante di scatto della fotocamera). Se sul pannel-
lo LCD del flash compare la segnalisazione „UE“,
significa che non è possible una corretta esposizio-
ne con il flash. Una freccia
(--
m
)
sul pannello
LCD indica che si è oltrepassata la massima porta-
ta del flash. Il campo di utilizzo non viene indicato
se il riflettore è inclinato in senso orizzontale.
Nel modo TTL viene visualizzato il raggio di portata
del mecablitz. Il valore a sinistra indica la distanza
minima ammessa per scattare una foto. Se la
distanza è inferiore a questo valore può verificarsi
una sovraesposizione. Il valore a destra indica il
campo massimo di utilizzo del mecablitz. Se la
distanza è superiore a questo valore può verificarsi
una sottoesposizione.
Per lasciare al sistema elettronico della fotocamera
sufficiente gioco per regolare la quantità di luce
necessaria, il soggetto dovrebbe trovarsi al centro
del raggio di portata. Modificando l'apertura del
Si el flash está en conexión con la cámara y se
realiza un cambio de datos (p.e. al pulsar el
disparador de la cámara) entonces es posible
una indicación del alcance.Si en el display LC
aparece „UE“ , entonces no es posible una
exposición correcta. Una flecha (--
m
) en la
posición del alcance máximo significa un exce-
so del alcance.
Con el reflector girado no es posible la indica-
ción del alcance.
En el funcionamiento TTL se indica el alcance de
distancia del mecablitz. El valor de la izquierda
señala la distancia de toma más reducida permitida.
Si la distancia queda por debajo entonces hay posi-
bilidad de sobre-exposición en las tomas. El valor de
la derecha indica el alcance máximo del mecablitz.
Si se sobrepasa este valor entonces es posible que
las tomas queden subexpuestas.
Para darle a la electrónica de la cámara suficiente
margen para la regulación de luz, el objeto a foto-
grafiar debería estar en el campo central del campo
de trabajo. La adaptación a la situación de toma cor-
27
☞☞☞
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 40 AF-4 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 40 AF-4 M in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info