517309
24
Zoom out
Zoom in
Previous page
1/78
Next page
Ein- und Ausschalten des Blitzgerätes
Zum Einschalten den Hauptschalter in die Positi-
on „BATT“ schieben. Wenn die Blitzbereitschaft
erreicht ist, leuchtet die Blitzbereitschaftsanzeige
„READY“ . Zum Ausschalten den Hauptschalter
auf die „OFF“ Position schieben. Die Stellung HV
des Hauptschalters und die seitliche Buchse für
externe Stromversorgung sind ohne Funktion.
Reichweitenanzeige - m oder feet
Im LC-Display des mecablitz erscheint an der Positi-
on (D) eine Reichweitenanzeige. Die angezeigten
Werte beziehen sich auf einen Reflexionsgrad des
Aufnahmeobjektes von 25%, was für die meisten
Aufnahmesituationen zutrifft. Starke Abweichungen
des Reflexionsgrades, z.B. bei sehr stark oder sehr
schwach reflektierenden Objekten können die
Reichweite des mecablitz beeinflussen!
Die Reichweite des Blitzgerätes ist abhängig von der
Filmempfindlichkeit ISO, der Brennweite des Objek-
tives bzw. der Blitzreflektorstellung und der am
Objektiv eingestellten Blende.
Mise en marche et coupure du flash
Pour mettre en marche le flash, repoussez l'inter-
rupteur sur "BATT". La disponibilité du flash est
signalée par l'allumage du témoin de recyclage
"READY" Pour couper le flash, repoussez l'inter-
rupteur sur "OFF". La position HV du commuta-
teur principal et la prise externe pour
l’alimentation en courant n’ont aucune fonction.
Affichage de la portée - m ou feet
A la position (D) de l'écran ACL du mecablitz appa-
raît une indication de portée. Les valeurs affichées
se rapportent à un taux de réflexion de 25 % du
sujet, ce qui correspond à la majorité des situations
de prise de vues. Des taux de réflexion très diver-
gents, par ex. pour des objets très fortement ou très
faiblement réfléchissants, peuvent avoir une influ-
ence sur la portée du mecablitz.
La portée du flash dépend de la sensibilité du film,
de la focale de l'objectif ou de la position du réflec-
teur du flash et de l'ouverture du diaphragme réglée
sur l'objectif.
In- en uitschakelen van de flitser
Om de flitser in te schakelen, de hoofdschakelaar
in
de stand "BATT" schuiven. Als de flitser opgeladen is,
licht de aanduiding voor de flitsparaatheid "READY "
op. Zet voor het uitschakelen de hoofdschakelaar
in de stand "OFF".
De optie HV op de hoofdscha-
kelaar en de contactbus aan de zijkant voor exter-
ne stroomvoorziening, hebben geen functie.
Aanduiding van de flitsreikwijdte - m of feet
In het LC-display van de mecablitz verschijnt op
plaats (D) een aanduiding van de flitsreikwijdte. De
aangegeven waarden zijn berekend voor een reflec-
tiegraad van 25% die op de meeste opnamesituaties
van toepassing is. Sterke afwijkingen van die reflec-
tiegraad, bijv. zeer sterk of zeer zwak reflecterende
onderwerpen kunnen de reikwijdte van de mecablitz
beïnvloeden!
De reikwijdte van de flitser hangt af van de filmge-
voeligheid ISO, de brandpuntsafstand van het objec-
tief, c.q. die van de reflector van de flitser en van het
op het objectief ingestelde diafragma.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 40 AF-4 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 40 AF-4 M in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info