517293

Metz MECABLITZ 34 CS-2 digital Manual

70
Zoom out
Zoom in
Previous page
1/80
Next page
Cordless SLAVE operation
Controllo SLAVE senza cavi
Funcionamiento esclavo sin cable
70
so that the SLAVE does not receive a complete
light pulse. In such an event close down the
aperture on the camera or mount a neutral
density filter in front of the lens.
It is quite sufficient to briefly switch the mecablitz off and
on again with the main switch ቤ to leave the „SLAVE
mode with the cordless Metz remote system“ for the
„mecalux SLAVE mode with preflash suppression“ (SLAVE
function selector in position 2). „ In position 1 of the SLAVE
function selector ቮ, the mecablitz always operates with
the „mecalux SLAVE mode.
The SLAVE only reacts to a light pulse from the
controlling „master“-. Flash units of other pho-
tographers within the same working radius
will not trigger the SLAVE.
When in cordless Metz remote mode there is
no exposure verification on the SLAVE. Only the
indication on the controller (master) is relevant
for correct exposure confirmation!
Cordless controller flash operation
In the cordless controller flash mode, the flashlight of
the mecablitz telecontrols the triggering of one or
more SLAVES.The controlling master flash is inserted
in the camera’s accessory shoe, or mounted on a
camera bracket, or is linked with the camera’s synch
contact (X contact) with a synchronising cable (see
page 48: Synchronisation).When used as a „master“,
the mecablitz 34 CS-2 digital only supports the
mecalux SLAVE function: the SLAVE function selector
of the mecablitz 34 CS-2 digital mounted on the
camera must be set to position 0.
Switch the SLAVE function selector ቮ of the
SLAVE unit to position 1!
The mecablitz is used either in the auto flash mode A or in
the manual flash mode M. No additional settings are requi-
red to use the mecablitz as a master flash unit (controller).
☞
☞
Ǻ
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 34 CS-2 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 34 CS-2 digital in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info