517293

Metz MECABLITZ 34 CS-2 digital Manual

72
Zoom out
Zoom in
Previous page
1/80
Next page
72
Troubleshooting hints - After-sales service
Soluzione di problemi, servizio assistenza
Fallos y Soluciones, Servicio al Cliente
10. Troubleshooting hints - After-sales
service
Remove dirt and dust with a soft dry cloth. Never use
detergents as these may damage the plastic parts of the
flashgun!
Forming the flash capacitor
For technical reasons it is necessary to switch on the
mecablitz for approx. 10 minutes every three months and
to fire a few flashes (the capacitor of the mecablitz chan-
ges physically if the flash unit is not switched on for an
extended period).
The batteries must supply sufficient power for flash rea-
diness to be indicated at the latest within 1 minute after
the mecablitz was switched on.
Before contacting the After-sales service please check the
following points:
The mecablitz 34 CS-2 is mounted on a camera
but does not fire a flash:
• Have the batteries been correctly loaded?
• Are the batteries exhausted?
• Has the flash unit automatically switched itself off?
• Is there synch contact with the camera?
• Has the SLAVE function selector l been set at „0“?
• The hot shoe is deactivated when a synch cable is
plugged into the synch socket!
When the mecablitz 34 CS-2 is used as a SLAVE
or servo flash unit and does not fire a flash:
• Have the batteries been correctly loaded?
• Are the batteries exhausted?
• Has the flash unit automatically switched itself off?
• Is the sensor for cordless flash operation receiving a light
pulse? Change the location of the flash unit, stop down
the aperture on the camera lens or diminish the surroun-
ding brightness.
• Has the SLAVE function selector ቮ been correctly set?
- (Digital) camera without measuring preflash: >>> SLA-
VE function selector ቮ in position 1.
- Digital camera with measuring preflash: >>> SLAVE
function selector ቮ in position 2.
• Address 1 must be set on the master for the SLAVE fun-
ction in the cordless Metz remote system!
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 34 CS-2 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 34 CS-2 digital in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info