598222
10
Zoom out
Zoom in
Previous page
1/17
Next page
Chapter II
MX 650 / MX 655
23
4.2. DC voltage measurement
600V
1000
750
Hz
REL
1000
PEAK
A
40
400
600
1mS
V
1000
HOLD
600
V.
V.
Press on the /
button to
display the
symbol (direct
signal).
Connect the red test lead to
the "+" input terminal and the
black test lead to the "COM"
input terminal.
Then place the touch prods
in contact with the points
where the DC voltage is to
be measured.
Then read the result on the
display.
4.3. Measuring AC current
6
0
0
V
1
0
0
0
4
0
0
4
0
6
0
0
1
m
S
P
E
A
K
A
7
5
0
1
0
0
0
V
H
z
R
E
L
1
0
0
0
H
O
L
D
6
0
0
(MX 650) Set the switch to A (corresponding to the 1000
A~ and 400 A~ automatic calibres).
(MX 655) Set the switch to 1000 A . The symbol
(alternating signal) should be displayed. If not, press on the
/ button, to make it appear.
Open the clamp jaws by pressing the trigger. Position the
clamp around the conductor to be measured.
Release the trigger. Check the clamp is properly closed. Read
the result of the measurement on the display.
If reading is difficult, press the HOLD button and read the
result afterwards.
If necessary, for better resolution you can move to a lower
range by means of the selector switch.
Note: For safety reasons, disconnect the measuring leads
before measuring current. The clamp should encircle only one
conductor, otherwise the measurement result may be
incorrect. The best measurement is obtained with the
conductor centred in the middle of the jaws.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 655 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 655 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info