598222

Metrix MX 655 Manual

9
Zoom out
Zoom in
Previous page
1/17
Next page
Chapter II
MX 650 / MX 655
22
3.6. PEAK function (1 ms)
This function enables 1 ms voltage or current PEAK signals to
be captured.
Before a signal is captured, the clamp must first be calibrated
by holding the PEAK button down for more than 2 seconds,
until "CAL" is displayed, indicating that the offset has been
correctly taken into account.
Choose the positive or negative sign of the peak (P+ or P-)
with short presses on the PEAK button.
To quit the manual range, you must hold the RANGE (MX 650)
or the / (MX 655) button down for at least 2 seconds; the
clamp then returns to normal mode.
3.7. MAX MIN function (500 ms)
To activate the MAX MIN function, press on the MAX MIN
button. The MAX value is then displayed.
If you press on the button again, the MIN value will be
displayed.
If you press on the button a third time, the instantaneous
measurement is displayed (however, the "MAX MIN" symbol
flashes, indicating that the function is still active).
To quit the manual range, you must hold the MAX MIN button
down for at least 2 seconds; the clamp then returns to normal
mode.
4. FUNCTIONAL DESCRIPTION
4.1. Measuring AC voltage
1000
400
40
600
1mS
PEAK
A
V
Hz
REL
1000
HOLD
600V
750
1000
600
• (MX 650) Position the switch
to V.
• (MX 655) Position the switch
to V. The symbol
(alternating signal) should be
displayed. If not, press on the
/ button, to make it
appear.
Connect the red test lead to the
"+" input terminal and the black
test lead to the "COM" input
terminal.
Then place the touch prods in
contact with the points where
the AC voltage is to be
measured.
Then read the result on the
display.
230.0
V
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 655 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 655 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info