633940
27
Zoom out
Zoom in
Previous page
1/188
Next page
ENGLISH
27
The machine is overloaded. Re-
duce the load before continuing to
work.
Specified maximum no-load speed is
not reached - motor not receiving suffi-
cient mains voltage:
use a shorter feed line or cable with
larger cross section
( 1.5 mm
2
).
Have power supply checked by a
qualified electrician.
Loss of cutting performance
Saw blade blunt (possibly tempering
marks on blade body):
Replace saw blade (see chapter
“Maintenance”).
Chip ejection blocked
No dust collector connected or suction
capacity insufficient:
increase suction capacity (air speed
20 m/sec at chip ejection tube).
14. Technical specifications
Voltage V 220 - 240 (1 50/60 Hz)
Wattage
power input P
1
power output P
2
kW
kW
2,00 kW S6 20%
1.27 kW S6 20%
Current draw A 9
Fuse protection min. A 16 (time-lag)
Protection class IP 20
Rated no-load speed (at 230V) rpm 4200
Cutting speed (at 230V) m/s 57
Riving knife thickness mm 2,3
Saw blade
Saw blade diameter (outside)
Saw blade diameter (inside)
Cutting width
max. base body thickness of saw blade
mm
mm
mm
mm
250 - 254
30
2.4
1.6
Depth of cut
with saw blade vertical
at 45° saw blade tilt
mm
mm
0...87
0...50
max. cutting width with rip fence mm 630
max. cross-section width with angle guide mm 200
Dimensions
without machine stand (L x W x H)
with machine stand (L x W x H)
Length of saw table
Width of saw table
mm
mm
mm
mm
740 x 750 x 355
790 x 945 x 850
670/970
715/995
Machine weight with machine stand kg 33.4
Noise emission values according to EN 61029 *
A-sound pressure level L
pA
A-sound power level L
WA
Measuring inaccuracy (K
pA
, K
WA)
dB (A)
dB (A)
dB (A)
99
112
3
* Emission values
Using these values, you can estimate the emissions from this power tool and compare these with the values emitted by other power
tools. The actual values may be higher or lower, depending on the particular application and the condition of the tool or power tool.
In estimating the values, you should also include work breaks and periods of low use. Based on the estimated emission values,
specify protective measures for the user - for example, any organisational steps that must be put in place.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo TS 254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo TS 254 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info