595109

Metabo SM 5-55 Manual

13
Zoom out
Zoom in
Previous page
1/80
Next page
ENGLISH
13
ENG
use a Pozidriv screwdriver bit.
e) If you are unable to insert screws to the required
depth, adjust the adjusting ring (9) until the
screw depth is correct.
f) Make sure that the screwdriver bit is attached
correctly (read the screwdriver Operating
Instructions). There should be no gap between
the adapter (2) and the screwdriver casing.
g) If you notice that the screw strip (11) is not
being fed in correctly (screws do not appear or
are missing), make sure that you push back the
depth stop (7) all the way and then move a suffi-
cient distance from the workpiece to allow the
depth stop to return to its original position.
The screwdriver magazine will only fill correctly
if the depth stop is pushed back completely. Do
not set the tool down on the depth stop (7) as
this may feed in screws unintentionally.
h) If you are unable to insert the sliding piece (6)
fully into the casing, check that the two screws
(8) are screwed in all the way.
i) Hold the tool at right angles to the work surface.
The screw will not be inserted deep enough if
the tool is held at an angle that deviates from
90° even slightly.
Recommended maintenance intervals:
Daily:
Check the screwdriver magazine for damage and
clean using compressed air (wear protective
goggles).
Weekly (see illustration on page 4):
When removing, remember that the sliding piece
(6) is spring-loaded.
- Push in the sliding piece (6) slightly, hold in this
position and then unscrew the screw (with roller)
(14).
- Remove the sliding piece (6), pressure spring
(16) and spring guide (15) from the casing and
clean using compressed air (wear protective
goggles).
- Remove heavy dirt deposits manually without
using aggressive cleaning agent.
- Do no lubricate individual components.
- Assemble in reverse order.
Monthly (see illustration on page 4):
In addition to weekly cleaning:
- Force out the pin (18) from left to right and
remove.
- Unscrew the crosshead screw (17) and remove
the socket retained by the crosshead screw (17).
- Remove the ratchet wheel unit (19).
- Clean the sliding piece (6) and ratchet wheel unit
(19) using compressed air (wear protective
goggles).
- Remove heavy dirt deposits manually without
using aggressive cleaning agent.
- Assemble in reverse order while lubricating
ratchet wheels with dry lubricant (such as
graphite).
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
tool.
See page 4.
A Screwdriver bit
(with safety lock)
For a complete range of accessories, see
www.metabo.com or the main catalogue.
Repairs should be carried out by Metabo or an
authorised customer service workshop. Only
genuine spare parts may be used.
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.
Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
Weight
:
0.5 kg
Compatible screw types, in screw strip:
Plaster-
board screws
Chipboard screws
Steel roofing screws
9 Cleaning, Maintenance
10 Accessories
11 Repairs
12 Environmental Protection
13 Technical Specifications
17026885_1211 SM 5-55.book Seite 13 Mittwoch, 14. Dezember 2011 11:28 11
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo SM 5-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo SM 5-55 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info