595156

Metabo OF E 1229 SIGNAL Manual

32
Zoom out
Zoom in
Previous page
1/76
Next page
32
G
G: Final setting of cutting depth is achieved by turning
knurled screw in clockwise direction.
1 mark = 0.1 mm
G: Procéder au réglage fin de la profondeur de fraisage
en tournant la vis moletée dans le sens des aiguilles
d’une montre.
1 trait de graduation = 0,1 mm
G: Feineinstellung der Frästiefe, durch Drehen der
Rändelschraube im Uhrzeigersinn.
1 Teilstrich = 0,1 mm
G: Fijninstelling van de freesdiepte door de gekartelde
schroef met de wijzers van de klok mee te draaien.
1 schaaleenheid = 0,1 mm
G: Girare la vite zigrinata in senso orario per
microregolare la profondità di fresatura.
1 graduazione = 0,1 mm.
G: Para un ajuste preciso de la profundidad de fresado,
girar el tornillo moleteado en el sentido de las agujas
del reloj.
1 raya de graduación de la escala = 0,1 mm
G: Ajustar a fino a profundidade de fresar rodando o
parafuso serrilhado em direcção dos ponteiros do
relógio.
1 traço de graduação = 0,1 mm
G: Fräsdjupets fininställning genom att vrida skruven
med räfflad huvud medsols.
1 delstreck = 0,1 mm.
G: Hienosäätö kiertämällä ruuvia myötäpäivään.
1 asteikkoviiva = 0,1 mm
G: Fininnstilling av fresedybden gjøres ved å dreie på
fingerskruen med urviseren.
1 delstrek = 0,1 mm.
G: Finindstilling af fræsedybden ved at dreje
fingerskruen med uret.
1 delstreg = 0,1 mm
G:Przeprowadzić regulację dokładną głębokości
frezowania przez obracanie śruby radełkowanej w
kierunku zgodnym z ruchem wskazówek zegara.
1 podziałka = 0,1 mm
G:A marásmélység finombeállítása a recézett
csavarnak az óramutató járásával megeggyző
irányú elforgatása révén történik.
1 beosztás = 0,1 mm
G:Ρύθµιση ακριβείασ του βάθουσ φρεζαρίσµατοσ
µε περιστροφή τησ ακέφαλησ βίδασ προσ τα
δεξιά.
1 γραµµή υποδιαίρεσησ = 0,1 mm
OfE_1229_Signal_0112_Teil1.qxp:OfE_1229_Signal_0508_Teil1.qxp 27.02.2013 16:57 Uhr Se
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo OF E 1229 SIGNAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo OF E 1229 SIGNAL in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info