Manual Metabo BAS 600 (page 10 of 38) (English, German, Dutch, French)

451402

Zoom out

Zoom in

1/38

1.1 Scope Of Delivery

Band Saw BAS 600, preassembled,

complete with - general purpose band saw blade

- grey iron table

- rip fence

- table insert

- operating instructions

User Responsibility/Warranty

This machine will perform in conformity with the

description contained in the instructions provided. This

machine must be checked periodically. Defective

equipment (including power cables) should not be used.

Parts that are broken, missing, obviously worn, distorted

or contaminated, should be replaced immediately. Should

such repair or replacement become necessary, it is

recommended that only genuine Elektra Beckum

replacement parts are used and that such repairs are

carried out by qualified persons approved by Elektra

Beckum or its representatives. Failure to comply relieves

Elektra Beckum from product liability. The aforementioned

also applies to all accessories offered for this machine.

This machine or any of its parts should not be altered or

changed from standard specifications. The user of this

machine shall have the sole responsibility for any

malfunction which results from improper use or

unauthorized modification from standard specifications,

faulty maintenance, damage or improper repair by anyone

other than qualified person approved by Elektra Beckum

or its representatives.

Please fill in the warranty registration card and send to

the address shown on it. Normal wearing parts and

consumables are not covered by the warranty.

Elektra Beckum reserves the right to change

specifications and design without prior notice and without

incurring obligation of any kind. Equipment referred to as

available or optional may be at extra cost.

1.2 Specified Conditions Of Use

This Band Saw model BAS 600 is designed for sawing

wood. Sawing or cutting any other material is not

permitted.

Prior to sawing check each workpiece for possible flaws,

inclusions of foreign matter (e.g. nails) etc.

This band saw can be used for rip and cross cutting

timber, provided a suitable saw blade is installed for the

job on hand.

Cut round stock only with the aid of suitable jigs and

fixtures.

The specified conditions of use entail the observation of

all operating, service and maintenance instructions given

by the manufacturer, as well as the close observation of

all safety information given in the operating instructions.

This band saw should only be set up, operated and

serviced by persons familiar with such work and who are

aware of the risks of such work.

All relevant safety regulation for the operation of circular

saws, as well as all generally accepted industrial medicine

standards and safety regulations have to be observed.

Contents

1 Specifications

1.1 Scope Of Delivery

1.2 Specified Conditions Of Use

1.3 Safety Information

2 Band Saw Installation

3 Rip Fence

4 Band Saw Setup

4.1 Blade Guiding

4.2 Blade Setting

4.3 Blade Speed Selection

4.4 Cutting Height Setting

4.5 Saw Table Tilting

4.6 Saw Blade Changing

4.7 Drive Belt Changing

5 Electrical Equipment

6 Dust Collection

7 Optional Accessories

8 Replacement Saw Blades

9 Wiring Diagrams

10 Spare Parts List

11 Exploded View Drawings

1 Specifications

Dimensions (lxwxh) 830x845x1860 mm

Weight 160 kg

Table height from floor 945 mm

Throat capacity 440 mm

Max. height of cut 275 mm

Saw blade

length 3380 mm

width 6 - 25 mm

Saw table tilts from 90° through 45°

Blade speed 410 - 1025 m/min,

steplessly adjustable

Motor capacity

Motor 1~ 230 V input P

1.5 kW output P

1.1 kW

Motor 3~ 400 V input P

1.5 kW output P

1.1 kW

Noise information according to DIN 45635

Sound power level L

: idlingunder load

85 dB(A) 90 dB(A)

Workplace related noise

emission value: 75 dB(A) 82 dB(A)

ENG

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BAS 600 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo BAS 600 Manual

Product: