784465
11
Zoom out
Zoom in
Previous page
1/15
Next page
Viewing and setting the parameters
After turning on the controller, the default “battery voltage” interface will be shown. This is the main interface. Next,
use the MENU button, to go through the different parameter interfaces. To set a parameter, press the MENU button
for >5 seconds, until the numbers start flashing. Now, use the SET and MENU buttons to adjust the parameter, making
it lower (SET) or higher (MENU). When the adjustment is finished, press the MENU button again and hold it down for
a few seconds, until the numbers stop flashing. The adjustments have now been saved.
1. The default interface with an overview of the main symbols:
After turning on the controller, the default interface will be shown. It shows the charging and discharging state,
battery status (5 bars) and the battery voltage.
2. Turning on or shutting off the connection to the load:
The SET button can be used to turn on or shut off the load.
Note: In the other interfaces, this button does not have this function.
3. Viewing and setting the float voltage:
In the second interface, the float charging voltage is shown. When the battery has reached the float voltage,
the controller will maintain the voltage value with its PWM charging mode, to avoid overcharging the battery.
To adjust the settings, use the SET and MENU button as explained above, at the beginning of this chapter.
4. Viewing and setting the recovery after undervoltage:
The next interface shows the recovered voltage. After the controller has conducted its function of under
voltage protection, the output of the load will be recovered as soon as the battery voltage returns to a value
higher than the under voltage protection value.
To adjust the settings, use the SET and MENU button as explained above, at the beginning of this chapter.
ENGLISH
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic PWM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic PWM in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info