784465
13
Zoom out
Zoom in
Previous page
1/15
Next page
Model PWM MSC-1010 PWM MSC-1020
Max. charge current 10A 20A
System voltage 12/14V
Max. input voltage 55V
Suitable battery type Sealed, gel, ooded
Low Voltage Disconnection (LVD) 11V adj. 9V - 12V
Low Voltage Reconnect (LVR) 12,6V adj. 11V - 13,5V
Float voltage 13,8V adj. 13V - 15V
Boost charging 14,4V
Over Voltage Disconnection (OVD) 16,5V
Temperature compensation -24V/°C for 12V system
Reverse connection protection Yes
Load: Over Current Protection (OCP) Yes, every 2 minutes restart once
Charge type PWM
Working temperature -20°C to +55°C
Terminal scale 28 - 10 AWG
Water resistance IP32
Dimensions 13,7 x 8,5 x 3,2 cm
Net weight 0,22 kg 0,23 kg
ENGLISH
Troubleshooting
1. Under voltage protection:
When this symbol appears on the screen and is flashing, the battery voltage is lower than the under voltage
protection. The controller has now entered the under voltage protection state and the output has been stopped.
Solution: Use the solar panel or battery charger to charge the battery. When the battery voltage has reached the
recovery value, the load will be turned on again.
2. Overload protection:
When this symbol appears on the screen and is flashing, there is an overcurrent or short circuit.
The controller has now entered the overload protection state and the output has been stopped.
Solution: After solving the problem of a short circuit and reducing the load, press the SET button to turn
the load back on.
3. Input overvoltage:
When this symbol appears on the screen and is flashing, the battery input voltage of the controller is
higher than the rated input voltage. The controller will turn off the output and activate the overvoltage
protection mode.
Solution: Please choose a battery with the right voltage to connect to the controller. Furthermore, any
other battery chargers need to be removed.
Technical specifications
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic PWM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic PWM in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info