784465
9
Zoom out
Zoom in
Previous page
1/15
Next page
Features
1. LCD display
2. Temperature sensor
3. Menu Button
4. Set Button
5. USB output
6. Solar system terminals
7. Battery terminals
8. Load terminals
Installation
1. Ready tools and cables. Use the correct cables. Ensure that the current density is <4mm2, and conductive, to
reduce the line voltage drop. With the 20A charge controller a cable of 6mm2 is recommended.
2. Make sure the location where the controller is installed, meets the applicable safety requirements. Please avoid using
or installing the controller in damp or dusty places, or places with flammable, explosive and/or corrosive gases.
3. Install the controller onto a fixed vertical surface. Please keep a space of 10 cm free around the controller, in
order to ensure good ventilation and heat dissipation.
4. Connect the controller and the battery with cables which have the right polarity. When the connection is
successful, the battery indicator light will turn on. Otherwise the connection will need to be checked and/or the
cables will need to be reconnected.
5. When connecting the controller to the load, make sure to use cables with the right polarity. Pay special
attention to + and – polarity, to avoid reversed connection. Otherwise the load may be damaged. In case
of an accident, please disconnect the solar panel, battery and load from the controller in sequence.
Note: Reversed battery polarity will not damage the controller, but may produce security risks for your
load appliances.
Operation
Description of the symbols on the LCD display
1
2
3
678
5
4
P1
P2
P3
P4
P8
P7
P6
P5
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic PWM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic PWM in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info