Manual Mellerware GLIDE II - 23120A (page 4 of 26) (English, French, Portuguese, Spanish)

799539

Zoom out

Zoom in

1/26

must wait for the pilot light to illuminate again, or you

will burn your clothes onto the iron. This will void the

warranty.

3.4. Dry ironing:

3.4.1. Make sure the temperature selection knob is at

the lowest level.

3.4.2. Set the iron on the support base on a steady,

firm surface.

3.4.3. Plug the appliance to the electrical power supply

and turn temperature selection knob to desired level,

the ready indicator light will turn on.

3.4.4. Once the light turns off, you may star to iron

over steady and firm surface.

3.4.5. When you have finished, turn the temperature

knob back to the lowest level, unplug from the electrical

power supply and wait until the appliance cools down

completely, before you proceed to store it.

IMPORTANT: If the iron contains water inside the tank

and you prefer dry ironing, move the steam control

lever to “0” position.

3.5. Steam ironing:

3.5.1. Make sure the appliance is unplugged from the

electric power supply, fill up the water tank. Make sure

not to overfill the tank.

3.5.2. Ensure the temperature selection knob is at the

lowest level, before plugging in the appliance.

3.5.3. Set the iron on its support base on a steady and

firm surface.

3.5.4. Plug in the iron and set the steam control lever

to the medium level.

3.5.5. Turn the temperature selection knob to the

desired level, suited for steam generation and the ready

indicator light should turn on.

3.5.6. Once the light turns off you may start ironing on

a steady and firm surface.

IMPORTANT: It is important to let the light to turn after

reaching the optimal temperature, otherwise the appli-

ance may experience leakage

3.5.7. Once you have finished its use, turn the tempera-

ture selection knob back to the lowest, unplug the appli-

ance from the electrical power supply and make sure to

wait until completely cools down before storing it.

IN ORDER TO STEAM IRON, HIGH TEMPERATURES

SHOULD BE SELECTED AT THE TEMPERATURE INDI-

CATOR KNOB.

3.6. Self-cleaning:

3.6.1. It is important to self-clean the appliance at least

once a month to remove calcium and any the built-up

minerals inside the iron.

3.6.2. Fill the water tank to its maximum level.

3.6.3. Place the iron in an upright position, plug into the

mains and select the maximum temperature.

3.6.4. Leave the appliance to heat up until the indicator

light turns off.

3.6.5. Unplug the appliance and place it in the sink.

3.6.6. Let the water flow out through the steam vents in

the base, while lightly shaking the appliance.

3.6.7. Release the button after a minute or when the

tank becomes empty.

3.6.8. Leave the iron in the upright position until it has

cooled.

3.7. How to deal with scale build up:

3.7.1. For the appliance to work correctly it should be

kept free of lime scale or magnesium incrustations

cause by the use of hard water.

3.7.2. To prevent this kind of problem, we recommend the

use of water with low lime or magnesium mineralization.

3.7.3. Homemade solutions are not recommended for

d.e-scaling this appliance, such as vinegar

4. Cleaning:

4.1. Disconnect the appliance from the mains power

supply and allow it to cool completely before undertak-

ing any cleaning task.

4.2. Clean the outer parts of the appliance with a damp

cloth with a few drops of washing-up liquid and then

dry. CAUTION! Do not immerse electrical parts of the

appliance in any liquid.

4.3. Do not use solvents, or products with an acid

or base pH such as bleach, or abrasive products, for

cleaning the appliance.

4.4. Never submerge the appliance in water or any

other liquid or place it under running water.

5. Storage:

5.1. Make sure the to turn off the iron by the tempera-

ture selection knob to the lowest level.

5.2. Set the iron in a vertical position on top of its base

support and let is cool itself completely. Make sure to

empty the water tank.

5.3. Roll the power cord gently around its base support

and store the product on a dry and cool place, away

from direct sunlight.

6. nomalies and repair:

6.1. Take the appliance to an authorised support centre

if product is damaged or other problems arise.

6.2. If the connection to the mains has been damaged,

it must be replaced, and you should proceed as you

would in the case of damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mellerware GLIDE II - 23120A in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mellerware GLIDE II - 23120A Manual

Product: