Manual Mellerware GLIDE II - 23120A (page 3 of 26) (English, French, Portuguese, Spanish)

799539

Zoom out

Zoom in

1/26

sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervi

sion or instruction concerning use of the appliance by

a person responsible for their safety.

2.2.5. This appliance is not a toy. Children should be

supervised to ensure that they do not play with the

appliance.

2.2.6. Do not touch metal parts of the iron while it is in

use, as it may cause serious burns.

2.2.7. The temperature of the accessible surfaces may

be high when the appliance is in use.

2.3. Use and care:

2.3.1. Fully unroll the appliance’s power cable before

each use.

2.3.2. Do not use the appliance if the parts or acces

sories are not properly fitted.

2.3.3. Do not turn the appliance over while it is in use

or connected to the mains power supply.

2.3.4. Unplug the appliance from the mains power

supply when not in use and before undertaking any

cleaning task.

2.3.5. This appliance should be stored out of reach of

children.

2.3.6. Do not store the appliance if it is still hot.

2.3.7. Never leave the appliance unattended when in

use and keep out of the reach of children.

2.3.8. If for some reason, the appliance were to catch

fire, disconnect the appliance from the mains power

supply and DO NOT USE WATER PUT THE FIRE OUT.

2.3.9. To keep the non-stick treatment in good condi

tion, do not use metal or pointed utensils on it.

2.3.10. Respect the MAX level indicator (Fig. 1)

2.3.11. Unplug the appliance from the mains before

refilling the water tank.

2.3.12. To ensure that the iron functions correctly, keep

the iron face smooth and do not hit it against metallic

objects (for example, the ironing board, buttons, zips.)

2.3.13. The use of distilled water is recommended,

especially if the water in your area contains any type of

grit or is “hard” (contains calcium or magnesium).

2.3.14. The water fill-up opening must not be left open

while the iron is being used.

2.4. Service:

2.4.1. Make sure that the appliance is service only suit

ably qualified technician, and that only original spare

parts or accessories are used to replace existing parts/

accessories.

2.4.2. If the power cord is damaged, the manufacturer

or its service agent, or similarly qualified person must

replace it in order to avoid a hazard.

2.4.3. Any misuse or failure to follow the instructions

for use renders the guarantee and the manufacturer’s

liability null and void.

3. Instructions for use:

3.1. Before use:

3.1.1. Remove the appliance’s protective film (if ap-

plicable).

3.1.2. Before using the product for the first time, clean

in the manner described in the cleaning section.

3.1.3. The first time the appliance is used a light smoke

may be detected.

3.2. Filling with water:

3.2.1. Unplug the iron before filling the water tank.

3.2.2. Hold the iron in a horizontal position.

3.2.3. Slowly pour water through the water inlet.

3.2.4. Do not fill past the “MAX” mark on the water tank.

NOTE: Your iron is designed to use tap water, however,

if the water is very hard, it is advisable to use distilled

water. The water tank should be emptied after each use.

3.3. Use:

3.3.1. Always check whether a label with ironing

instructions is attached to the clothing article to be

ironed. Follow these instructions in all cases.

3.3.2. Turn the temperature control dial to set the ap-

propriate temperature indicated in ironing instructions

or in fabric label.

3.3.3. Insert the plug into the wall socket. The indicator

light will illuminate.

3.3.4. When the indicator light switches off you may

start ironing.

CAUTION: Iron from low temperature first then move

to high temperature fabrics. Should you need to iron at

a low temperature, after using a high temperature you

LABEL TYPE OF TEXTILE

Do not iron this article

• Synthetics, Nylon, Acrylics,

Polyester, Rayon

•• Wool, Silk

••• Cotton, Linen

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mellerware GLIDE II - 23120A in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mellerware GLIDE II - 23120A Manual

Product: