551323
24
Zoom out
Zoom in
Previous page
1/37
Next page
First installation First installation
ENGLISH ENGLISH
10
11
A new window appears on the screen with the parame-
ters and settings of the satellite. Please pay attention that
the LNB Type is made on Universal.
LNB Typ
The options are:
Normal C
Searching by analogue TV channels in low frequencies
Normal Cu
Searching by analogue TV channels in low frequencies
Universal
Searching for analogue and digital TV channels
LNB Low and High Frequency
By using the settings of LNB Type the low and high frequencies are set automatically.
22K Ton
By using the LNB Type Universal the setting for 22k Tone is set automatically to AUTO. This setting is responsible
to find analogue and digital TV channels. By using the 22-kHz signal in conjunction with a universal LNB is the
entire Astra satellite system to receive (analogue and digital) with a single 60cm antenna. To receive digital TV
and radio signals will therefore only one set-top box for digital television, are required.
LNB Power
The LNB needs for receiving digital TV channels a power of 13 V and 18V. Please use the setting 13/18V, otherwi-
se not all TV channels can be found. In case of LNB Power is Off, the LNB do not get any power from the satellite
receiver and no channels can be found and received.
Transponder
This setting needs normally no changes. Transponders are used in principle to a signal that comes from an
earth station to a satellite prepare, so that the end-user (TV, telephone, computer), the optimum signal sent
and received can be recovered. A transponder is working on the whole as a kind of amplifiers and frequency
converters. It receives multiple signals at a certain frequency from an earth station, amplifies these filters out
interference, put it into another (the receiver dependent) frequency levels increased again and sends the sig-
nals back to Earth.
Strength
The received signal strength is shown in percentage and in the bar.
Quality
The received signal quality is shown in percentage and in the bar. Lower values are an indication for more
artifacts, freeze pictures and other picture distortions.
Scan-Modus
Die beiden Optionen sind Standard oder Blind-Scan.
Defaults
The searching runs in depending of the preset
satellite and transponder lists.
Blind Scan
With this option the searching runs without reading the transponder list and every received signal
will be analyzed.
Programm
Allows you to decide whether you want to search only free channels or pay-TV. The pay-TV is encrypted and
can usually only a very few times in clear to be seen. Approx. 2 / 3 of all TV channels are encrypted and can not
therefore ASTRA with the recipient decrypts to be seen.
Note:
In the selection is only open after a successful scan, the TV channel list much more manageable.
Now, all search parameters are set and the scan can
run. Press the OK button and the scan begins.
All received TV and radio stations are displayed in the
two lists. After the scan, the TV and radio stations are
stored in the two lists and the unit goes into the live
image of the first TV station.
Press the OK button and you can then adjust the
other parameters of the scan. Press the BLUE button
on the remote control and access to the final para-
meters for the search.
The searching and founded the TV channels, you
can affect the order in which Scan Mode. A standard
search or a „blind“ Search.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat 3400se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat 3400se in the language / languages: English, German as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info