551323
25
Zoom out
Zoom in
Previous page
1/37
Next page
First installation First installation
ENGLISH ENGLISH
12
13
Toneburst is an additional switching criterion that
can deliver what the receiver. This signal does not
include digital commands, but it can nevertheless
be evaluated by most of the switches for position
switching.
Now you can insert two satellite.
A new window appears on the screen with the para-
meters and settings of the satellite. Please pay atten-
tion that the LNB Type is made on Universal.
The distribution of analogue and digital signals from the Astra and Eutelsat is using DiSEqC ™ (Digital Satellite
Equipment Control, in other words: Deißäck) is possible if only one cable to be laid to the satellite receiver.
This new tax system complements the conventional switching criteria, 14/18 Volt or 22 kHz, and removes the
restrictions on maximum 4 switching states. In the simplest version of DiSEqC ™ is used between two universal
LNBs switch to. The 22 kHz switching circuit is used for the lower and upper frequency band LNB.
DiSEqC 1.0 controls up to four LNBs with the command position A / B and Option A / B. DiSEqC 1.1 controls
up to 64 LNBs, it will switch in several levels of government. For 16 LNBs, take for example four 4 / 1 DiSEqC 1.0
switch, whose outputs are then placed on the inputs of a 4 / 1 DiSEqC 1.1 switch.
After selecting a configuration of the satellites could
look like. Also look here at the settings for each sa-
tellite that the LNB type was chosen correctly. Are
required for receiving digital TV, the digital setting
(Universal).
After all settings are running you can start searching.
Here you have the option of the two selected satelli-
tes scan individually or both of them together.
BLUE:
Single Satellite Search
RED:
Both Satellite Search in one run
GREEN:
Delete all Satellite
YELLOW:
Delete the selected Satellite
After all settings are running you can start searching.
Here you have the option of the two selected satelli-
tes scan individually or both of them together.
BLUE:
Single Satellite Search
RED:
Both Satellite Search in one run
Press the RED or BLUE button and you can influence
the search and found the TV to where you are eit-
her with Scan Mode, a standard search or perform a
„blind“ search.
Press the RED or BLUE button and you can influence
the search and found the TV to where you are eit-
her with Scan Mode, a standard search or perform a
„blind“ search.
Now, all search parameters are set and the scan can run. Press the OK button and the scan begins.
All received TV and radio stations are displayed in the two lists. After the scan, the TV and radio stations are
stored in the two lists and the unit goes into the live image of the first TV station.
Now, all search parameters are set and the scan can run. Press the OK button and the scan begins.
All received TV and radio stations are displayed in the two lists. After the scan, the TV and radio stations are
stored in the two lists and the unit goes into the live image of the first TV station.
2. Single connection between Satellite / LNB and Receiver with Toneburst 3. Using more than two satellite by DiSEqC 1.0/1.1
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat 3400se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat 3400se in the language / languages: English, German as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info