551323
22
Zoom out
Zoom in
Previous page
1/37
Next page
Connection Connection
ENGLISH ENGLISH
06
07
Ensure that the power switches of this unit and other equipment to be connected, are turned off before com-
mencing connection
Read attentively the instructions before connecting other equipments
Ensure that you observe the color-coding when connecting audio and video cords
Please connect the unit with TV by only one kind of video output format, and setup a suitable output mode
(including signal mode and signal code type), otherwise there will be image distortion.
Connect the USB flash drive carefully on to the USB
port. In general the label should show the USB stick
to the top.
Remove the USB stick only when you are back in
Live DVB-S program, otherwise the drive could be
damaged.
How to
1. Connect the receiver with the SCART
output of your TV.
2. Connect the antenna cable to the
antenna input (LNB IN) of the receiver.
3. Screw the F-connector at the entrance
hand hard.
4. Now connect the Receiver to the mains.
5. Turn on the receiver and Your TV.
6. If necessary, set the TV to the
corresponding SCART input.
Note:
By using the loop through connector you can connect for example a second DVB-S Receiver.
Note:
Due to legal requirements of CE-conformity, the customer is asked to only connect USBSticks to the USB port.
The USB port can be supported up to 16 GB flash memory size. In order to the many different USB-Sticks and
the build-in electronics components a support of all USB-Sticks can not guaranteed.
Please format the USB-Sticks only with FAT 32 file system. Other file systems are not supported and can not
recognizes by the USB port.
Save all datas from the USB memory before you connect to the device.
13
Deutsch
Verbindung
Allgemeine Informationen:
Stellen Sie sicher, das das Gerät ausgeschaltet und von dem Stromnetz getrennt ist.
Lesen Sie die Bedienungsanleitung des Fernsehers und beachten Sie dort die Sicherheits-
hinweise.
Achten Sie auf eine sorgfältigen Anschluss der Steckverbindungen.
Bitte achten Sie auf die Einstellungen bei der Videoausgabe. Falls Ihr Fernseher über
SCART RGB-fähig ist, bitte wählen Sie bei die Option CVBS/RGB bei den Einstellungen:
“Setup -> TV-System -> Videoausgang”.
Verbinden zu einem TV Fernsehgerät und zu der Satellitenschüssel
Die schematische Zeichnung zeigt die Verbindungen des Megasat receiver zu der Antenne und
zu dem Fernsehgerät.
Zu einem Fernseher und der Antenne
TV
LNB IN
LNB OUT
IR
DC IN 12V
TV and antenna USB
15
Deutsch
Verbindung
USB Anschluss
Schließen Sie den USB-Stick vorsichtig an dem
USB Anschluss an. In der Regel sollte die Be-
schriftung des USB-Sticks nach oben zeigen.
Entnehmen Sie den USB Stick erst dann, wenn
Sie wieder im Live DVB-S Programm sind, andern-
falls könnte der Stick beschädigt werden.
Hinweise:
1. Schließen Sie am USB Anschluss aufgrund von CE-Richtlinien nur USB Flashspeicheme-
dien (USB Sticks) an.
2. USB Speicher können bis zu 16 GB unterstützt werden. Leider gibt es eine Vielzahl von
unterschiedlichen USB-Sticks und nicht alle können unterstützt werden.
3. Bei USB Speichermedium wird nur FAT oder FAT 32 unterstützt. Falls ein Medium mit
einem anderen Dateisystem formatiert ist, dann wird diese nicht erkannt.
4. Sichern Sie immer alle Daten von dem USB Speicher, wenn dieser an dem Gerät benutzt
wird.
ERS
USB Anschluss / Kartenleser
The schematic pictures shows the connection between the receiver, the TV set and to the satellite dish.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat 3400se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat 3400se in the language / languages: English, German as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info