599209
41
Zoom out
Zoom in
Previous page
1/182
Next page
31
GB
5 Memory
5.4
Deleting
memory
This unit features 2 separate memories, each with a capacity of 99 memory
slots. Results are automatically stored in the memory selected by the user.
When the memory is full, the oldest reading is always the first to be deleted.
Press the MEMORY button
to display the stored readings. After all the seg-
ments in the display have been shown, an average value of all the measure-
ments in the selected memory is displayed. This average is indicated by “ ”.
When the MEMORY button
is pressed again, the individual readings
(switching between systolic, diastolic, pulse and date/time) of the last mea-
surement stored are displayed. If this measurement was taken in the 3MAM
procedure,
is displayed. If an arrhythmia was detected during
the measuring process, the arrhythmia symbol will be displayed, but not
flashing.
Press the MEMORY button
again to move backwards through the stored
readings.
If you do not press any buttons for approx. 1 minute, the device automatically
switches back to standby mode.
Select the entry for the measurement you want to delete. Press and hold
the START button
for approx. 10 seconds until the memory symbol
flashes. Confirm your deletion request by pressing the MEMO button
.
” appears briefly on the display and 2 short beeps sound. The entry
you selected has been deleted. The display returns to standby mode.
The data can be deleted from the memory selected by pressing and holding the
MEMORY button
for about 7 seconds. After 7 seconds, the display
shows “ ” ( CLEAR ) which indicates that all data will be deleted.
Confirm your deletion request by pressing the MEMO button
again. Three
short beeps sound during the procedure.
5.2
Displaying
stored results
5.3
Deleting a
measurement
5.1
Recording
the results
51080_MTX_West_FINAL_akt.qxd:Blutdruckmessgerät 10.09.2009 11:16 Uhr Seite 31
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana MTX 51080 bovenarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana MTX 51080 bovenarm in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info