01-02_DVD-Disney_MD41770_DE-GB.FH11 Wed Mar 24 11:50:08 2004 Seite 16
Unless stated, all operations described are based on the
remote control use. Some operations can be carried out
on the unit..
Basic Playback
Turn on the power of the TV and, if necessary, any other components
connected to the DVD.
Make sure the TV (and audio receiver) are set to the correct channel.
To turn on the DVD, press POWER
.
Press OPEN/CLOSE
to open the disc tray.
Place a disc in the tray with the label facing
up.
Press PLAY
.
The tray closes. Normally, playback starts
automatically. If not, press PLAY again.
Depending on the DVD, a title menu might
appear on the screen first (see "Title Menu").
PAUSE
To interrupt playback, press PAUSE
. The picture will freeze.
Press PLAY
to resume normal playback.
STOP
Press STOP
to stop playback. The picture will disappear. A resume
message appears on the screen.
Press PLAY
to resume playback at the point where playback
was stopped.
To stop playback completely, press STOP
a second time.
Fast Forward/Reverse
During playback, press or .
With DVDs, press repeatedly to select the required forward or
reverse speed: x 2, x 4, x 8, x 16.
To return to normal speed, press PLAY
.
Slow Forward/Reverse
During playback, press PAUSE .
Then press
or. .
Press repeatedly to select the required speed: 1/2, 1/4, 1/8.
To return to normal speed, press PLAY
.
GB
PLAYING A DISC
NOTE:
If a feature or function is not available, a Disney-icon
will appear on the screen.
Searching Titles
Numerical buttons
Press the numerical buttons for the desired track number.
On the screen appears an entry field with two or three digits (e. g.
5). If the desired title has less than two or three digits, enter the
first empty digits with zeros: for "title 5" enter "05" in a two-digit field,
"005" in a three-digit-field.
Playback will start automatically.
SKIP
During playback, press SKIP or repeatedly to move to
another track.
Press SKIP
once to go the beginning of the current track.
Display
You can check the status of the current disc by pressing DISPLAY
during playback:
Press DISPLAY once: The elapsed and remaining playing time
of the current track will be shown.
Press DISPLAY
once: The elapsed and remaining playing time
of the total disc time will be shown.
Press DISPLAY once: The name of the current title will be
shown.
Press DISPLAY
twice: The name of the current title, the elapsing
time, the repeat setting and the playback status will be shown.
Press DISPLAY once: The elapsed and remaining playing time
of the current chapter will be shown. Press the number buttons to
go to another chapter directly (e. g. "02" for chapter 2).
Press DISPLAY
twice: The elapsed and remaining playing time
of the current title will be shown. Press the number buttons to go
to another title directly (e. g. "02" for title 2).
Press DISPLAY
three times: The current repeat setting and, if
applicable, the layer number will be shown: L 0 = layer 0; L 1 =
layer 1).
Press another time DISPLAY
to leave the function.
GB-17
