643529
26
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 5
INSTALLATION AND USE MANUAL
page 26
Comfort air kit Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
5.3.1. Variation for air outlet with container
The essence container (2) is available only on the one-direction air
outlet with and without light. Its purpose is to humidify the air.
The container (2) can easily be removed from its seat. To do so, lift the
door (1) at the bottom and extract the container (see fig.4).
Place only water in the container. It is possible to add essences to
perfume the room.
IMPORTANT!
EXTRACT THE CONTAINER FROM ITS SEAT FOR
FILLING ONLY WHEN THE AIR OUTLET IS COOL AND
THE STOVE UNIT IS OFF.
5.3.2. Variation for air outlet with illumination
If you decide to install the ventilation kit with illumination, you must
remove the knockout panel located on the structure of the air outlet
(fig.5) and pre-install the light (a).
To open the pre-cut knockout panel, strike it with a rubber mallet.
(fig.5).
Install the light (a) on the structure of the air outlet at the knockout
panel so that it is facing the front of the structure (fig. 6). Fasten the
light using the two brackets (c) with the screws (b) and bolts (d)
provided.
Once you have inserted the light (a), make the electrical connections.
In the rear part, insert the two female terminals on the tips of the light
(fig.7)
For forced ventilation, you will need to connect the power cord of the
light (included) to the control unit in the appropriate terminal. For
natural ventilation, the connection must be made to a wall switch (to
be done by the installer).
The cable provided for connection of the light is 2.5 metres. For
greater lengths you will need to use an extension cord.
IMPORTANT!
The cable for the connection of the light/fan is made
of silicone material to withstand high temperatures. If
you use extension cords (over 2.5 m) or in any other
circumstance, make sure that the cord does not come
into contact with the hot parts of the stove and of the
air connection hoses in the cladding of the structure.
If you install the comfort air kit with illumination, it is
necessary to pre-install the light on the kit before
inserting it in the hole.
Figure 5– Knockout for insertion of light
Figure 7-Lamp electrical connections
Figure 6– Fastening the light
Figure 4– Container
1
2
a
b
c
d
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info