643529

MCZ Vivo 90 Wood Manual

25
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 5
INSTALLATION AND USE MANUAL
page 25
Comfort air kit Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
5.3. INSTALLATION OF THE COMFORT AIR KIT
Before installing the natural or forced ventilation COMFORT AIR kit,
make sure you have the following material available (fig.1):
1. For natural ventilation: connect the hoses (a) and the
flanges (d) Ø 150
to the connections on the upper part of the
stove unit (fig.1).
For forced ventilation: connect the flanges (d) and the
hoses (a) Ø 100
to the connections on the upper part of the
stove unit. Forced ventilation uses hoses with a smaller
diameter than those used for natural ventilation.
2. prepare on the wall (f) at the desired height two holes for the
hot air outlets measuring 185 mm x 185 mm
3. Insert the structure of the selected outlet (g) in the holes of
185 x 185 mm, working from the outside towards the inside of
the wall
4. on the inner part of the wall, at the structure of the air outlet
(1), attach the fastening bracket group (2), using the four
screws and nuts provided (fig.2)
5. connect the hose (a), previously fastened to the fireplace hose,
to the connection located on the structure of the air outlet (e)
6. tighten the hose (a) on the connection (e) with the provided
clamp (c)
7. before the cladding is complete connect the electrical
cables of the light and/or fan, since everything to be done
afterwards can be done form the outside.
If limitations of space make it impossible to use the bracket provided,
proceed in any case so that the kit is firmly fastened, using the
recessed box (optional).
It is advisable to:
Limit the ducting to 2 linear metres for natural
ventilation, and 8 linear metres for forced ventilation.
For natural ventilation, it is advisable to position the air
outlets at a height of not less than 2 m above the floor. (fig.3).
For forced ventilation, the kit can also be positioned at a
certain distance from the fireplace stove (max 8 m). In this case,
you must properly insulate the ducts
so that the heat is not
dispersed and heats only the masonry.
If possible, provide ducts of the same distance to prevent
different quantities of air at different outlets.
Figure 2– Kit installation
Figure 1– Hose connection
a
b
d
c
f
g
e
1
2
2
m
l
m
i
n
i
m
o
Figure 3 – Installation of hot air outlets
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info