643410
23
Zoom out
Zoom in
Previous page
1/74
Next page
21
4-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
POSITIONING
Before installing the product assess the optimal position.
One can install the product in a pre-existing traditional replace or as a new system.
In addition to lift the product to the recommended height of 600 mm one can purchase a metal support separately (refer to the relative
optional accessories price list)
INSTALLATION IN A PRE-EXISTING FIREPLACE
Assess the following elements:
The supporting surface of the product must have the following characteristics:
support the weight of the product and of any accessories
consistency such as to allow anchoring by means of plugs for safety
perfectly level
the jambs as perpendicular as possible to the surface
The housing compartment must be large enough to accommodate the product.
After verifying the conditions needed for proper installation proceed with the installation of the product:
x the base of the product to the supporting surface
carry out all chimney plumbing and electrical connections in compliance with the regulations in force.
Any space between the cladding walls and the product can be closed via a compensation frame that can be easily disassembled in the
event of maintenance of the insert.
It is mandatory to x the product to the supporting surface, as otherwise the product could tilt when extracted.
One must check that all connections (plumbing and electrical) enable to extract the product.
INSTALLATION AS A NEW SYSTEM
Assess the following elements:
The supporting surface of the product must have the following characteristics:
support the weight of the product and of any accessories
consistency such as to allow anchoring by means of plugs for safety
perfectly level
After verifying the conditions needed for proper installation proceed with the installation of the product:
x the base of the product to the supporting surface
carry out all chimney plumbing and electrical connections in compliance with the regulations in force.
It is mandatory to x the product to the supporting surface, as otherwise the product could tilt when extracted.
One must check that all connections (plumbing and electrical) enable to extract the product.
Proceed to assemble the cladding.
It is best to leave the product without cladding for a few days to check the tightness of all plumbing connections.
For any type of installation, both on a new system as on an existing one, it must be possible to inspect the connections
of the hoses tted on the wall, because when the product is extracted one must disconnect the pipes from the system.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 80 Pellet Hydro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 80 Pellet Hydro in the language / languages: English as an attachment in your email.

The manual is 12,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ Vivo 80 Pellet Hydro

MCZ Vivo 80 Pellet Hydro Usermanual and installation guide - Dutch - 64 pages

MCZ Vivo 80 Pellet Hydro Usermanual and installation guide - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info