PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL
page 33
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
Mode:MANU Menu
Fire:1 Fan:2
Mode:MANU Menu
Fire:1 Fan:2
Mode:MANU Menu
Fire:1 Fan:2
21.0°C 21.04
OFF
Mode:AUTO Menu
Temp:20° Fan:2
Mode:AUTO Menu
Temp:20° Fan:2
21.0°C 21.04
OFF
temperature in the room. This mode is indicated by the word AUTO on
the control panel.
With this mode you can also use an advanced function called AUTO-
ECO which is described later (
paragraph 4.7.4.
)
At each lighting, the stove automatically sets to the
operating mode that it was in the last time it shut
down.
4.7.1.1.
Changing from manual to automatic mode
It is possible to pass from the MANUAL function to the AUTOMATIC
function and vice-versa by selecting the related key on the control
panel.
4.7.2. Manual mode
In this mode you can only vary the thermal power provided by choosing
the flame power.
By pressing the switch behind the stove the display of the panel is set
to OFF, by pressing any key the screen with the word MENU will
appear.
With the upper left button select the MANU function (MANUAL
mode). In this mode, using the bottom left button (F) it is possible to
adjust the 5 heating powers of the stove, while with the bottom right
key (C) the speed of the fans is adusted.
4.7.3. Automatic mode
Whereas MANUAL mode lets you simply choose the thermal power
provided with no variation of operation over time, AUTOMATIC mode
lets you set a temperature to be reached in the room. In this operating
mode the stove will automatically vary the thermal power provided so
as to keep the temperature in the room constantly at the set value.
From the first screen with the word OFF, press any key and the screen
with the word MENU will appear.
With the upper left button select the AUTO function (AUTOMATIC
mode). In this mode using the bottom left button it is possible to
adjust the temperature desired in the room.
Upon reaching the desired temperature in the room, the stove will
gradually go to minimum power. If instead the room temperature drops
below the set limit, the stove will gradually come back up to maximum
hearing performance.
The room temperature is highlighted by the control panel using the
reading of the probe placed near the switch of the stove.
Manual mode
Automatic mode