634676
40
Zoom out
Zoom in
Previous page
1/89
Next page
40
8. Initial operation
c) Recording level display
The recording level display (2) provides information about the output level.
The level on the indicator should not exceed the „0“ dB value as otherwise distortion of the music signal
can occur. A short blinking or deflection beyond the „0“ dB value in the case of signal peaks is not
harmful.
d) Volume control
Adjust the volume of the connected amplifier to minimum.
Turn the MASTER control (9) and the GAIN control (3) to minimum.
Slide the channel fader (12) to minimum.
Use the input selection switch (1) to select the appropriate channel input.
Start the connected output device, e.g. a CD player. If this device has a volume control, set the volume to about
75% of the maximum level.
Slide the appropriate channel fader (12) right to the top.
Turn the MASTER control (9) to maximum.
You can set the signal level using the GAIN control (3). The signal level can now be read from the recording level
display. It should not exceed „0“ dB.
Now set the required maximum volume using the volume control on the amplifier. Avoid distortion.
You can use the sound controls (5) to alter the playback sound.
Repeat the setting for all mixer channels. All channels should have about the same volume when cross-fading
between the channels so that there are no great differences in the volume which would otherwise require the
output signal to be adjusted.
After you have made these settings, use only the MASTER control (9) when you want to change the playback
volume.
Make sure that the connected loudspeakers and the amplifier are not overloaded. The playback
should not be distorted under any circumstances.
If the music signal is distorted in spite of the fact that the volume on the amplifier is not at a high
setting, and all the settings on the mixer are correct, then switch off the mixer immediately and
check all connections. If you can find no errors in the connection, please contact a specialist.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-60-PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-60-PC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info