19
The procedure for remote access code setup /
display is as follows:
1. Press the [FORWARD ] key for about 2
seconds and then release it to display the
remote access code. The code display / setup
will be a high digit first, then a middle digit,
and then a low digit.
2.
Press the [FORWARD ] key or the [REPEAT
] key to increase or decrease the digit.
3. Press the
[
ANS
]
key to select the correct digit.
4. If a keypress exceeds 8 seconds, the setup /
display procedure will be aborted.
Please note:
If the AC power fails and there is no battery
installed or the battery is low on power, the
remote access code will return to the factory
setting ”159”.
If you have left home, you can change the
remote access code as follows:
1. Dial your telephone number from a touch
tone telephone.
2. When the system answers, you must press
and hold
[
*
]
for 1 second to skip the OGM
play, a beep tone will be heard.
3. Press the security code to enter the remote
control mode.
4. Enter
[
*
6
]
and then the new security code.
5. If a valid code number is entered, the system
changes the remote access code.
REMOTE CONTROL
CHANGE YOUR
REMOTE ACCESS
CODE REMOTELY
CHANGE THE
REMOTE ACCESS
CODE
