629542
11
Zoom out
Zoom in
Previous page
1/22
Next page
OPERATING THE SYSTEM
Please make sure that all connections have been made to the system before the power is connected,
failure to do so may result in damage to the system and may void the guarantee.
1. Switch on the Control Box. Check the system is operating by listening to the sound of the
antenna.
2. The power voltage of the Control Box should be measured using a multimeter to ensure
that the supply voltage is not less than 12V DC under operating conditions.
3. Switch on the Set-Top-Box, if used. Check different channels to see if the video and audio
is being received correctly.
PRECAUTIONS
> No user-serviceable parts inside.
> Use a dry cloth to clean the unit. Do not allow electrical equipment to be exposed to rain or moisture.
> If there is a problem DO NOT remove the cover. Contact an authorised dealer.
> Your receiver is designed for use in a bus, boat, caravan or similar vehicles.
> Do not connect any unsuitable equipment to the unit as this could cause permanent damage or danger.
> Remove the batteries from the remote control handset if it is not to be used for long
periods. Non-removal could result in damage to the handset caused by leaking batteries.
> Dispose of batteries correctly in order to protect the environment.
> This receiver is a non standard satellite receiver and is only to be used with the
Maxview Omnisat Dome Auto Satellite System. If you connect an LNB to the output
of this unit, it may cause damage to the LNB and/or receiver
RECEIVER FUNCTIONS & CONNECTIONS
5. LNB Input
6. Loop Out
7. RCA Audio Outputs (Left, Right)
8. RCA Video Outputs
9. Scart Connection
10. Power Input
11. Serial Port
12. Infrared Remote Control
5 6 7 8 9 10 11 12
1. Stand-by (On/off)
2. Programme Down
3. Programme Up
4. LED Display
1
4
2
3
34 11
MENU MAP
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL002 OMNISAT DOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info