629542
9
Zoom out
Zoom in
Previous page
1/22
Next page
Note: The ‘F’ connector on the Omnisat Dome side of the cable is connected to the female ‘F’
connector socket on the antenna. The plastic ‘F’ connector boot on the antenna cable is pushed
onto the ‘F’ connector.
Inside vehicle route cable to satellite receiver and fit ‘F’ connector.
The 12-24V DC supply voltage should be taken from the correct point of the vehicle to
supply voltage to the Control Box. The 12-24V DC supply voltage is supplied via a
2 x 0.75mm2 power cord to connect to the Control Box.
The antenna cable coming from the Omnisat Dome is connected to the input of the
Control Box via an ‘F’ connector.
If a Set-Top-Box is used, connection between the Control Box and Set-Top-Box can be
made with the provided Loop through cable.
Once the electrical connections to the Control Box and Set-Top-Box (optional) are
completed, the Control Box and Set-Top-Box (optional) should be securely fastened to
prevent vibration.
SEE PAGE 12 FOR RECEIVER CONNECTION DIAGRAM
936
GENERAL SPECIFICATIONS
• AnimatedOSD
• 8000Channels
• Smartchannelscan
• Veryfastchannelswitch
• Mosaicchannels(15stillpicture,1livepicture)
• PictureinGraphics(PIG)
• VariousGames
• VariousUtilities
• CustomOSD-Radiobackgrounds
• Channellistbackup
• 16favoritechannelgroups
• Advancedchannelediting(Multipledeletion,multiplemove,hide,skip)
• DVBandTeletextSubtitle
• VBIandOSDTeletext
• ElectronicProgramGuide(EPG)
• Multilingualaudiosupport
• MultilingualOSD
• Parental,setupanddevicelock
• 8VCRtimers(once,dailyandweeklymodes)
• FirmwareandchannellistupdatefromPCorotherbox
• SCPC-MCPCcompliant
• 200MHzmainCPU
• 16MBFlash
• CI(CommonInterface)slot(optional)
TECHNICAL SPECIFICATIONS
SYSTEM SOURCES
CPU (Central Processing Unit): 200 MHz RISC
RAM: 128 Mb RAM
Flash memory: 16 Mb
DATA
Standard: RS232, 115200, 8, n, 1
Connector: 9 pin, D-type, male
POWER SUPPLY
Type: Switch Mode
Power consumption: 30W
Operating voltage: 12V.…24V DC
GENERAL
Dimensions: 185 x 202 x 60 mm
Weight: 1400 gr
Operating temperature: 5~40 °C
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL002 OMNISAT DOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info