650496

Maxdata SN 40 Manual

78
Zoom out
Zoom in
Previous page
1/85
Next page
78 79MAXDATA SN 40 M1 – User GuideProtecting Local Disks
78 79MAXDATA SN 40 M1 – User GuideProtecting Local Disks
6. In the “Recovery Server” field, enter the name or IP address of the storage system where the
backups reside.
Note
You can use the storage system name only if your network has a DNS server.
7. Make sure the selected authentication type is “CHAP”.
Client Backup and Recovery supports only “CHAP” authentication.
8. In the “Recovery Password” field, enter the recovery CD password that you specified when
you protected the disk or when you last changed the password.
If you don’t remember your password, ask your system administrator to you can change it on
the storage system (as described in “Changing the Password for Restoring Hard Disks” on
page 45) and enter the new password here.
9. In the left column, select the backup that corresponds to the disk or partition that you want to
recover.
If you protected only one disk or partition, only one item appears in this list.
If you protected multiple disks or partitions, you can identify the right item by looking at the
“Attr” and “Size” columns. The “Attr” column displays the attributes of each listed item
(“D” for disk, “P” for partition, and “S” for system disk). For example, if you protected both
a system disk and a data disk, the system disk will be labeled “S”, and the data disk will be
labeled “D”. If you protected disks of different sizes, the “Size” column (which displays the
number of megabytes) can also help you identify the right backup.
10. In the right column, select the date and time of the backup that you want to recover.
In general, selecting “Base Disk” is the same as selecting the most recent backup. However,
if your system crashed during the last backup, the base disk will be in an incomplete state. In
that case, be sure to select one of the listed backup dates rather than “Base Disk”.
If you select “Base Disk”, a backup of that disk image on the storage system is created, and
this backup is recovered. As a result, if the maximum number of backups have already been
performed, the oldest backup is deleted to make room for this backup.
11. Specify whether or not to delete all backups that occurred after the selected date by selecting
or clearing “Rollback the remote disk”.
Caution
This action is not reversible. If you select this option, you will not be able to subsequently recover
from another later backup.
12. Specify whether or not to scan the differences between the backup and the disk to which you
are recovering data by selecting or clearing “Enable micro-scan”.
If you’re simply overwriting corrupted data on the same disk that you protected previously,
select this option. Client Backup and Recovery will scan both the backup and the disk, and
copy only the data that differs between the two. This can minimize the impact to the network,
although the scanning process takes some additional time.
If you’re recovering the backup to a brand new disk, clear this option. Client Backup and
Recovery will copy all the data from the backup to the new disk without doing any scanning
(there will be nothing to scan on the new disk).
13. Select “Next”.
14. Select the disk where you want to recover the data, and select “Next”.
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata SN 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata SN 40 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info