Manual Maxdata SN 40 (page 76 of 85) (English)

650496

Zoom out

Zoom in

1/85

76 77MAXDATA SN 40 M1 – User GuideProtecting Local Disks

6. When you have finished viewing or copying all the desired data, select the backup in the

“Backups” list and click “Close View”.

The Windows Explorer window closes automatically, and the “Backup View Open” column for

the selected backup now displays “No”.

Recovering a Non-system Disk or Partition

You can recover a non-system disk or partition only as long as that disk or partition is not currently

being backed up, and only as long as a more recent backup view is not open. For example, if you

created backups on Monday and Tuesday, and Tuesday’s backup view is open, you cannot recover

Monday’s backup until you close Tuesday’s view.

In addition, if you recover a partition and other partitions of that same disk are also protected, protection

for those other partitions temporarily stops until the selected partition is recovered.

Caution

When you recover a disk or partition, you will lose any data that was written to the disk after the time of

the selected backup, as well as any backups that were performed after the backup you’re recovering.

You might want to copy any newer files that you want to keep to another disk before you recover the

disk. To copy files from a backup, refer to “Recovering Files from a Backup” on page 75.

In addition, if network errors occur or the storage system shuts down during recovery, your operating

system might become unstable, and you will have to recover it using the recovery CD (or re-install

the operating system if you did not protect your system disk).

Be sure to recover your disks or partitions only when your environment is stable.

To recover a non-system disk or partition:

1. Click “Restore”.

2. In the “Protected disk” list, select the disk or partition that you want to recover.

3. If a view of a more recent backup than the one that you want to recover is open (as indicated

by “Yes” in the “Backup View Open” column), select the open backup view and click “Close

View”.

4. In the “Backups” list, select the backup that you want to recover.

5. Click “Restore Disk”.

6. When the confirmation message appears, click “Yes”.

The disk or partition is recovered to exactly its state at the date and time of the selected

backup.

To let you monitor the progress of this activity, the “Status” page appears automatically.

The “Current activity” area displays the percentage of the recovery that has completed, and

the speed at which the data is being sent over the network. The “Progress” bar graphically

indicates how much of the recovery is complete.

 Note

You can cancel this operation at any time by clicking “Stop Current Activity”. However, this will leave

the local disk or partition in an incomplete state, and you will have to recover it again before you can

use it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata SN 40 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxdata SN 40 Manual

Product: