650499

Maxdata Quantum PX502 Tape Library Manual

4
Zoom out
Zoom in
Previous page
1/14
Next page
PX502 Tape Library Quick Start Guide
4
Table 2 Rack Hole Types
Figure Description
Square rack holes are the most
common type of rack holes. They
can accept either cage nuts which
mount from the back of the rail or
clip nuts which clip on from the
side of the rack rail.
Through holes require clip nuts to
accept mounting hardware.
Threaded holes require neither
cage or clip nuts to accept
mounting hardware.
N
OTE: The rails within the rack have a hole pattern that
repeats throughout the rail. X marks the screw
positions. Install nut clips (included in the
accessory kit) on the rails if necessary.
Cage nut
Clip nut
Clip nut
Figure 3 Rail Hole Pattern
Installing the Library 0
Installing the PX502 tape library consists of the following
steps
:
• Installing the Rack Mount Shelves
• Installing the Library Chassis
• Cabling the Library
WARNING: If the rack is empty at the time of installation,
do NOT install the PX502 tape library too
high in the rack. The weight of the library
may cause the rack to become “top heavy”
and unstable if installed in the top of an
empty rack. Begin installing the PX502 tape
library from the bottom of the rack if more
than one library is installed.
N
OTE: If this is an upgrade to an existing library system,
see “Multiple Library Stacks” on page 13.
.625 in (15.9 mm)
.625 in (15.9 mm)
.5 in (12.7 mm)
.625 in (15.9 mm)
.625 in (15.9 mm)
Top of rack
.312 in (7.92 mm)
.5 in (12.7 mm)
Hole pattern
The marks above (X)
indicate the location of
mounting hardware on the
rack rails. Ensure that any
necessary mounting
hardware is installed on the
rack rails prior to installing
the chassis.
1 PX502 System (4U)
1U = 1.75 in
(44.45mm)
4U
Front panel screws
mounting positions
Back panel screws
mounting positions
Front panel screws
mounting positions
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum PX502 Tape Library at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum PX502 Tape Library in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info