650499
2
Zoom out
Zoom in
Previous page
1/14
Next page
PX502 Tape Library Quick Start Guide
2
Choosing a Location 0
When choosing an installation site for the PX502, consider
the following requirements:
Rack Space Requirements
Environmental Conditions
Rack Space Requirements 0
Ta ble 1 contains the rack requirements for the PX502 tape
library.
Table 1 Rack Requirements
Environmental Conditions 0
The installation site must have the following environmental
conditions:
Humidity: 20%-80% non-condensing
Temperature: 10°C-35°C (50°F-95°F)
Altitude: -500 to 10,000 feet (-152 to 3048 meters)
These environmental conditions apply when the PX502 tape
library is in operation.
Preparing for the Installation 0
Before you begin the installation procedure in this section,
make the following preparations as described in this
section:
Providing Necessary Tools
Taking ESD Precautions
Dimensions PX502
Depth 31 in (78.7 cm)
Width 19 in (48.3 cm)
Height 6.75 in (17 cm), 4U
Weight 52 lbs (23.6 kg)
Air Clearance Open 4 in (10 cm) behind unit
for proper air flow
N
OTE: For additional specifications, refer to the
Quantum PX500 Series User’s Guide
(PN 81-
81290)
Providing Necessary Tools 0
Provide the following tools for unpacking and installing the
PX502 tape library:
#1 PHILLIPS® screwdriver
#2 PHILLIPS screwdriver
#1 flat blade screwdriver
Allen wrench (2.5mm and 3mm) included in accessory
kit
Antistatic wrist strap included in accessory kit
Tak i n g E S D P r e c a u t i o n s 0
Some components within the PX502 tape library contain
static-sensitive parts. To avoid damaging these parts while
performing installation procedures, always observe the
following precautions:
Keep the PX502 turned off during all installation
procedures.
Use an antistatic wrist strap (included in the accessory
kit).
Keep static-sensitive parts in their original shipping
containers until ready for installation. Look for the ESD
sticker to identify static sensitive parts.
Avoid touching connectors and other components.
Unpacking the PX502 Tape Library 0
This section explains how to unpack the PX502 tape library
and move it to its final installation location.
N
OTE: Dry climates and cold-weather heating
environments have lower relative humidity and
are more likely to produce static electricity.
NOTE: Inspect the outer library packaging for damage. If
there is any damage evident on the library
packaging, do not continue with the installation
and contact Quantum customer support.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum PX502 Tape Library at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum PX502 Tape Library in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info