171515
16
Zoom out
Zoom in
Previous page
1/35
Next page
16 17MAXDATA Server PLATINUM 500 I M7Hardware Installations and Upgrades
16 17MAXDATA Server PLATINUM 500 I M7Hardware Installations and Upgrades
Removing the Chassis Cover
1. Remove the cover.
2. Loosen the three thumbscrews that fasten the left front cover to the chassis.
3. Pull the cover outwards (approx. 1 cm) so that the guiding hooks can slide out of the chassis
grooves.
4. Tilt the chassis cover upwards on its side and then take it off.
Installing 5.25-inch Drive (DVD, streamer)
The server is supplied with a total of six mounting rails for 5.25-inch devices. Unused mounting rails
can be found on the chassis beside or above the assembly areas of the drive cages.
1. Remove chassis cover.
2. Unscrew two drive rails from their storage place beside the drive cages.
3. Attach one drive rail each to the both left and right sides of the drive. The green handles should
face outwards.
4. Remove the blank cover from the relevant 5.25-inch bay (chassis and bezel).
5. Finish inserting the drive into the bay until the drive rails lock into place.
6. Connect the drive to the power supply and data cable according to the manufacturer’s
instructions.
7. Replace the chassis cover and reconnect the bezel assembly.
To remove a 5.25-inch drive, push the green handles inwards towards the mounting rails and pull the
drive and rails forwards.
Installing SATA or SAS Hot Swap Drives
1. Press in on the green latch (letter “A”) at the end of the drive carrier to disengage it from
the hot swap drive cage. Pull out on the black lever (letter “B”) to fully open the drive carrier.
When the lever reaches a fully opened position, it will push the drive carrier out from the hot
swap drive cage.
Figure 9. Releasing Drive Carrier from Hot Swap Cage
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 500 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 500 i in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info