Manual Maxdata platinum 500 i (page 18 of 35) (English)

171515

Zoom out

Zoom in

1/35

18 19MAXDATA Server PLATINUM 500 I M7Hardware Installations and Upgrades

Installing and Removing Memory

The DIMMs are labelled as DIMM_A1 to DIMM_B2 and DIMM_D1 to DIMM_E2 on the board.

Begin populating your memory with DIMM_A1. First add memory in the first socket of each of the

following memory channels before installing the DIMMs in the second socket of a channel. In systems

with two processors, distribute the memory evenly over both processors. Please refer to Chapter 2

for more detailed information on the system memory.

Installing DIMMs

To install DIMMs, follow these steps:

1. Observe the safety and ESD precautions at the beginning of this book.

2. Turn off all peripheral devices connected to the server. Turn off the server.

3. Disconnect the AC power cord.

4. Remove the server’s cover.

5. Locate the DIMM sockets. See Figure 7.

Figure 13. Installing Memory

6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open

position.

7. Holding the DIMM by the edges, remove it from its anti-static package.

8. Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM

with the keys in the socket (see inset in Figure 13).

9. Insert the bottom edge of the DIMM into the socket.

10. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips

snap into place. Make sure the clips are firmly in place.

11. Reconnect or replace any internal components you needed to disconnect or remove.

12. Replace the server’s cover. Reconnect any external components you needed to disconnect.

13. Attach the AC power cord.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 500 i in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxdata platinum 500 i Manual

Product: