171515
15
Zoom out
Zoom in
Previous page
1/35
Next page
PB 15MAXDATA Server PLATINUM 500 I M7Hardware Installations and Upgrades
3 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the installation precautions at the
end of this manual.
System references in relation to the chassis refer to a pedestal-mounted server when viewed from
the front.
Tools and Supplies Needed
Phillips (cross head) screwdriver (#1 bit and #2 bit)
Needle nosed pliers
Antistatic wrist strap and conductive foam pad
Removing and Installing the Bezel Assembly
To remove the bezel assembly, follow these instructions:
1.
Unlock the two plastic tabs on top of the bezel assembly by pressing lightly (see Figure 8, point A).
2. Rotate the bezel assembly no more than 40 degrees forward and pull it diagonally upwards.
To install the bezel assembly, follow these instructions:
1. Place the bezel assembly with bezel hooks on the metal ridge on the lower front side of the
chassis. During installation, the bezel assembly is at an opening angle of approx. 30 degrees to
the top of the chassis.
2. Rotate the bezel assembly towards the chassis and push against it so that the hooks snap into
place on top.
Figure 8. Bezel assembly
A
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 500 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 500 i in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info