171515
13
Zoom out
Zoom in
Previous page
1/35
Next page
12 13MAXDATA Server PLATINUM 500 I M7Server System Features
12 13MAXDATA Server PLATINUM 500 I M7Server System Features
Hardware Requirements
Processor
One or two Intel
®
Xeon
®
5500 processors must be installed.
System Memory
The server board provides four memory channels, each with two slots. Channels A and B with
DIMM A1, A2, B1 and B2 are assigned to processor 1. Channels D and E with DIMM D1, D2, E1
and E2 are assigned to processor 2. Channels D and E can only be used if processor 2 is populated.
If two processors are populated, then they can both access the entire memory via Intel
®
QuickPath
Interconnect (Intel
®
QPI).
Within a channel, DIMM 1 must be populated before DIMM 2 can be used.
DIMM configuration is shown in the following figure.
Processor 1 Socket Processor 2 Socket
Channel A Channel B Channel D Channel E
A1 A2 B1 B2 D1 D2 E1 E2
Figure 7. DIMM Configuration
Available Memory Modules
1.5 V DDR3 DIMMs, registered (RDIMMs) or unbuffered (UDIMMs, with or without ECC)
Mixing of RDIMMs and UDIMMs is not permitted
If at least one UDIMM is installed without ECC, the entire memory is operated without ECC.
The following DIMM and DRAM technologies are supported:
RDIMMs:
- Single, dual and quad rank
- x4 or x8 DRAM with 1 Gbit and 2 Gbit technology, no support for 2 Gbit DRAM-based 2 GB or
4 GB RDIMMs
- DDR3 1333 (only single and dual rank), DDR3 1066 and DDR3 800
• UDIMMs:
- Single and dual rank
- x8 DRAM with 1 Gbit or 2 Gbit technology
- DDR3 1333, DDR3 1066 and DDR3 800
DIMM A2
DIMM A1
DIMM B2
DIMM B1
DIMM D2
DIMM D1
DIMM E2
DIMM E1
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 500 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 500 i in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info