Manual Maxdata platinum 3200 i (page 26 of 45) (English)

171513

Zoom out

Zoom in

1/45

26 Server Board Features

Jumper Name Pins What Happens at System Reset

BIOS Bank Select (J1C3)

1 - 2 Bank 0: Boot to an alternate BIOS.

2 - 3 Boot from the standard BIOS. These pins should be jumpered

for normal operation.

CMOS Clear (J1D1) 1 - 2 BMC control: these pins should be jumpered for normal

operation.

2 - 3 Erase CMOS: If these pins are jumpered for 5 to 10 seconds,

the CMOS settings will be cleared on the next server reset.

These pins should not be jumpered for normal operation.

NOTE

The server does not need to be reset with the jumpers on

these pins for the CMOS to be cleared. To clear the CMOS:

Power down the server. Place the jumper on pins 2 - 3 for 5 to

10 seconds. Moving the jumper back to pins 1 - 2.

Power on the server.

Password Clear (J1D2)

1 - 2 Protect password: These pins should be jumpered for normal

operation.

2 - 3 Erase password: If these pins are jumpered for 5 to 10

seconds, the password will be cleared on the next server

reset. These pins should not be jumpered for normal opera

tion.

NOTE

The server does not need to be reset with the jumpers on

these pins for the password to be cleared. To use this jumper

to reset the password: Power down the server. Place the

jumper on pins 2 - 3 for 5 to 10 seconds. Move the jumper

back to pins 1 - 2. Power on the server.

BMC Force Update (J1E3)

1 - 2 Disable force update: These pins should be jumpered for

normal operation.

2 - 3 Enable force update: Jumpering these pins forces a BMC

update.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 3200 i in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxdata platinum 3200 i Manual

Product: