472809

Mavic Wintech E-BOLT Manual

14
Zoom out
Zoom in
Previous page
1/100
Next page
14
ENGLISH
10.1 Use the right button to select screen 1 (DST).
Hold down the right button for more than 4 seconds.
The bike number (BK 1) flickers. Use the left button to select
the number of the bike chosen: BK 2 for a second bike, BK H
for the home-trainer sensor (see the user guide for the Home-
Trainer kit for further explanations on its use).
Briefly press the right button to validate.
10. PAIRING THE SECOND BIKE
Your Wintech computer can be paired with two speed sensors
simultaneously, thus enabling you to use the same computer
on a second bike or with a pair of training wheels. Similarly,
your Wintech computer can recognize a sensor that is
specially designed for the Home-Trainer.
Once the extra sensors have been paired, your computer
will know which sensor is sending messages to it and
will automatically adjust to the parameters of the bike
used without any intervention on your part. To use this
characteristic, you must have the second bike kit, ref. 995 239
01, or the Home-Trainer kit, ref. 995 240 01, which are sold
separately.
11. SETTING THE TIME
Use the right button to select screen 2 (CLK).
Hold down the right button for more than 4 seconds.
The tens of hours digit flickers.
Use the left button to set the tens of hours. Validate with the
right button. The next digit flickers. Use the left button to set
the hours and validate with the right button.
Set the minutes in the same way.
R
R
4 sec.
R L R
L R R
R
4 sec.
10.1
L R
12. SETTING
12.1 Use the le
Hold down the
number flicker
s
bike number
(1, 2 or H), the
n
validate with th
right button.
12.2 Then set t
odometer for t
h
bike selected: u
the left button
to modify the
flickering digit,
then validate a
n
move on to the
next digit with
t
right button. W
you have set t
h
odometer, use
the right butto
n
validate.
11
13. SETTING
AND THE
13.1 Consult th
check your whe
For a more prec
measurement,
follows:
- Make a mark
and on the gr
o
point of conta
the tire and th
- Do one full tur
wheel and ma
10.2
10.2 The speed (0.0) and pedaling cadence (0) flicker. Turn the
front wheel until the speed is displayed (if you are using the
pedaling cadence option, turn the cranks also). When both
speed and cadence are displayed, press the right button to
validate.
The sensor pairing is now complete.
wintech-esbolt bis.indb 14wintech-esbolt bis.indb 14 20/03/07 12:34:1920/03/07 12:34:19
Cyan quadriMagenta quadriJaune quadriNoir quadri
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech E-BOLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech E-BOLT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info