Manual Mavic Wintech E-BOLT (page 15 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

472809

Zoom out

Zoom in

1/100

ENGLISH

ground the place where the mark on the tire touches the

ground.

- Measure the distance (Ø) between these two points in

millimeters.

13.2 Use the left button to select screen 3 (ATM).

Hold down the right button for more than 4 seconds. The bike

number flickers and the CIR display appears. If necessary,

use the left button to modify the bike number (1, 2 or H), then

validate with the right button.

13.3 The default value 2105 appears, and the digit on the

extreme left flickers. Enter the distance you have already

measured (in millimeters), by modifying the flickering digit with

the left button, then validate with the right.

When you have set the

circumference, validate with the

right button.

13.4 Then use the left button to

select the distance unit (Miles

or Kilometers). Validate with the

right button.

If required, repeat the operation

for bike 2.

conds.

idate with the

t button to set

12. SETTING THE ODOMETERS

12.1 Use the left button to select screen 4 (ODO).

Hold down the right button for more than 4 seconds. The bike

number flickers. If necessary, use the left button to modify the

bike number

(1, 2 or H), then

validate with the

right button.

12.2 Then set the

odometer for the

bike selected: use

the left button

to modify the

flickering digit,

then validate and

move on to the

next digit with the

right button. When

you have set the

odometer, use

the right button to

validate.

12.1

4 sec.

L R

13.3

L R R

13.4

L R

12.2

L R R

13. SETTING THE CIRCUMFERENCE

AND THE UNIT

13.1 Consult the table of approximate correspondences to

check your wheel circumference (see table 13.1).

For a more precise

measurement, proceed as

follows:

- Make a mark on the tire

and on the ground at the

point of contact between

the tire and the ground.

- Do one full turn of the

wheel and mark on the

TyreØTyreØ

26’’x1,5 2020 700Cx19 2100

26’’x1,75 2070 700Cx20 2110

26’’x1,9 2090 700Cx23 2130

26’’x2,0 2110 700Cx25 2140

26’’x2,1 2130 700Cx28 2150

26’’x2,2 2150 700Cx32 2170

26’’x2,3 2170

650Cx19 1930

650Cx23 1990

13.1

13.2

4 sec.

flicker. Turn the

are using the

. When both

ght button to

wintech-esbolt bis.indb 15wintech-esbolt bis.indb 15 20/03/07 12:34:2020/03/07 12:34:20

Cyan quadriMagenta quadriJaune quadriNoir quadri

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech E-BOLT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 7,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mavic Wintech E-BOLT Manual

Product: