472806
5
Zoom out
Zoom in
Previous page
1/26
Next page
4
5. INSTALLING THE WHEEL MAGNET
5.1 Position the magnet on a spoke so that it
passes opposite either of the lever marks
and at a maximum distance of 5 mm.
The magnet must be facing outward from
the wheel.
5.2
If you use the E-Bolt sensor, on a
mountain bike, it might be necessary to
use the adjustment magnets to reduce
the distance between the sensor and
the magnet.The magnet must be facing
outward from the wheel.
5.3
Must be cut for use on bladed Zicral
spokes.
6. INSTALLING THE BATTERIES
Power supply for the computer:
1 CR2430 battery.
Power supply for the speed sensor:
1 CR2032 battery.
Power supply for the cardio belt (Wintech
USB HR and Wintech USB Ultimate only):
1 CR2032 battery.
Only use this type of battery.
Installing the batteries in the computer, speed
and cadence sensors:
6.1. Remove the battery cover by turning it a
quarter turn counterclockwise, using a
coin or a battery.
6.2.
Insert the battery into its recess, keeping
the + side uppermost.
6.3.
Ret the battery cover and close it by
turning it a quarter turn clockwise.
Do not to use excessive force, or you will damage the unit.
Check the condition of the seal on the battery cover each time you change the battery. Replace
the battery cover if the seal is damaged.
Always perform the above operations in a dry place.
Changing the computer’s batteries has the eect of zeroing the following parameters:
– total distance;
– measurement unit (M or KM);
– wheel circumference;
– time.
After installation, or after changing batteries (in sensors or computers), it is imperative
to repeat the digital pairing operation described in section 10.2 of this notice.
Battery life: 12 to 24 months depending on use.
BASIC NAVIGATION
7. DESCRIPTION OF THE DISPLAY
BK 1, 2 or H Number of bike used
AV Average speed (up to 99,9 km/h or 62 Mi/h)
MAX Maximum speed (up to 99,9 km/h or 62 Mi/h)
KM / Mi
Distances in kilometres or miles
Trend indicator: if the current speed exceeds the average speed, the up arrow
is displayed. If the current speed is below the average speed, the down arrow is
displayed.
If the current speed equals the average speed, no arrow is displayed.
Altimeter indication line
(Wintech USB Alti and Wintech USB Ultimate only)
VS Vertical speed (up to 2500m/h or 8202,5 ft/h).
In meters per hour (m/h) or feet per hour (ft/h)
ASC Altitude gain
Temperature indicator
(from -15°C / 5°F to 50°C/122°F)
Slope indicator (from -25 to +25 %)
m/h ft/h Vertical speed in meter or feet
Heart rate indication line - up to 240 bpm
(Wintech USB HR and Wintech USB Ultimate
only)
AV Average heart rate
Max Maximum heart rate
Heart rate displayed as a percentage of maximum
heart rate
Sound alarm. Displayed only when alarm is turned on
CAD Pedaling cadence (optional – up to 180)
DST Trip distance (up to 1999.99)
CR 1 to 9 Lap time
ATM Stopwatch (up to 19 h 59 min 59 s)
ODO
Distance totalizer (up to 99.999)
5.1
5.2
5.3
6.1
6.3
6.2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech Alti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech Alti in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info