472806
3
Zoom out
Zoom in
Previous page
1/26
Next page
2
1. PRODUCT DESCRIPTION
Main Unit Box
a. Computer
b. Cardio Belt
c. Wintech Manager software
CD
d.
Memo stick
Sensor Box
E-Skewer
e.
E-Skewer sensor
f. Computer mount
g. 25,4mm handlebar reducer
h. Wheel magnet
E-Bolt
i.
E-Bolt sensor
f. Computer mount
g. 25,4mm handlebar reducer
h. Wheel magnet
j. Adjustment magnets
Fork Sensor
k.
Fork sensor
f. Computer mount
g.
25,4mm handlbar reducer
h. Wheel magnet
l. Zip ties (x3)
After installation and before you use your computer for the rst time, you MUST
perform the digital pairing operation described in section 10.2. of this guide.
If you don’t, there will be no communication between the computer and the
dierent sensors and your system will not work.
INSTALLATION
2. INSTALLING THE COMPUTER MOUNT
2.1 Install the mount on the handlebar,
to the right of the stem. To x it to an
oversize, 25.4 diameter handlebar,
use the 25.4 adapter.
2.2
The mount can be installed in a variety
of positions: with the computer forward
of, or above the handlebar stem.
2.3.
When setting it, the computer support
needs to turn freely on the mount
arm. Loosen the screw using a cross-
slot screwdriver
2.4.
Once you have chosen the right
position, tighten the mount screw with
a cross-slot screwdriver and secure
the computer support screw again.
3. FITTING/REMOVING THE COMPUTER
3.1. Slide the computer onto the mount from the front until it locks into place with an audible
click.
3.2.
To remove the computer from its mount, press and hold the tab located under the computer
mount and slide the computer toward the front of the bicycle.
wintech manager
b
a
h
j
k
i
l
c d
e
g
f
(x3)
1
2
2.1
2.3 2.4
2.2
3.1 3.2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech Alti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech Alti in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info