472806

Mavic Wintech Alti Manual

7
Zoom out
Zoom in
Previous page
1/26
Next page
6
10.1. Heart rate alarm and workzone
(Wintech USB HR and Wintech USB Ultimate only)
Press and hold the right button for 6
seconds.
Briey press again the right button
(BPR) to enter the dierent stages of
the heart rate section:
10.1.1. Sound Alarm.
Briey press the left button (BPL) to
turn on or o the alarm.
Briey press the right button (BPR) to
validate your choice and move to the
next stages of the heart rate settings
(Heart rate limits).
10.1.2. Cardiac limits.
The rst gure to set up is your
maximum heart rate (FC Max):
As a result from the last button
operation, the rst digit of the
maximum heart rate ashes.
Briey press the left button (BPL)
to set the rst digit.
Briey press the right button (BPR) to
validate the rst digit and move to the
next one.
Repeat those 2 operations to set the
2
nd
and 3
rd
digit of your maximum
heart rate (MAX).
When validating the 3
rd
digit of
the maximum heart rate by briey
pressing the right button (BPR), you
move to the set up of your lower HR
limit (Lo). Set this gure up using the
same method as for the maximum
Heart Rate. Then, you can proceed
to the upper limit (Hi) using the same
method.
When validating the 3
rd
digit of the
upper limit (Hi) by briey pressing the
right button (BPR), you exit the set up
menu and return to last active display.
In order to learn these values
(maximum heart rate, lower and
upper limits), Mavic recommends
that you should take an eort test in a
specialized center.
Otherwise you can use the following
approximate values:
FC Max = 220 – age
Upper limit: 85% of FC Max
Lower limit: 70% of FC Max
10.2. Digital pairing
The digital pairing operations MUST be performed to ensure a reliable and ecient
communication between the Wintech computer and all its speed, cadence and
Heart Rate sensors.
If you don’t, the Wintech computer won’t read any data coming from the sensors.
10.2.1 First t the cardio belt to
the body.
To do so, moisten the sensor zones
situated on the back of the belt.
Open the belt at one of its
extremities. Position the belt on
the torso, just under the pectoral
muscles. The Mavic logo should
be positioned at the centre of your
chest.
Then close the belt, making sure the
sensor zones are at against the
skin. If necessary, adjust the
tightness of the elastic strap.
WARNINGS: Persons who have a
pacemaker, debrillator, or other
implanted electronic device use
the heart rate monitor at their
own risk. Before starting the initial use of the heart rate monitor, we recommend an
exercise test under a doctor’s supervision. this will ensure the safety and reliability of
the pacemaker and the heart rate monitor when used simultaneously. Exercise may
include some risk, especially for those who have been sedentary. We strongly advise
consulting your doctor prior to beginning a regular exercise program.
10.2.2. Enter the pairing menu:
From any active display, press and hold the right button (BPR) for 6 seconds.
On Wintech USB HR and Wintech USB Ultimate, briey press the left button (BPL) once to
move to the Pair section.
Briey press the right button (BPR) to start the pairing operations.
The heart pictogram will light up. As soon as the heart rate is displayed, the pairing of the HR
belt is done.
Briey press the right button (BPR): the gure after BK is ashing, indicating the speed sensor
your are about to pair.
Briey press the left button (BPL) to successively select BK 1, BK 2 or BK H according to the
sensor you wish to pair.
Briey press the right button (BPR) to validate your sensor choice: the sensor number, speed
and cadence gure ashes.
Turn the front wheel until the speed is displayed. If you are using the pedalling cadence option,
turn the cranks also. When both speed and cadence are displayed, press the right button to
validate.
If the computer receives a signal but the speed is zero, the display OK appears.
6 sec.
any
screen
1 click
select
select
select
select
select
select
select
select
select
select
1 click
1 click
1 click
1 click
1 click
1 click
1 click
1 click
1 click
1 click
10.1
EXIT
10.2.1
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech Alti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech Alti in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info