613880
7
Zoom out
Zoom in
Previous page
1/32
Next page
7
USERS MANUAL SOLADIN 600 ENGLISH
Choosing the location to install
Obey the following stipulations during installation:
The Soladin is suited for indoor use only.
Ambient temperature: -20 ... 50°C; (power
derating above 40°C), Humidity: 0-90% non
condensing
Install the Soladin in the vicinity of a wall socket
Do not install the Soladin in environments with
heavy dust development or humidity.
If the Soladin is installed in the immediate vicinity
of living areas, take into account that it produces
a slight noise level when operating.
Mount the Soladin vertically on a solid, non-
resonating, wall.
Mount the Soladin in such a way that obstruction
of the airflow through the ventilation openings is
prevented
No objects must be located within a distance of
20 cm around the Soladin.
Multiple Soladins must be mounted next to each
other, not above each other. Minimum spacing:
20 cm.
Directions for installation
The Soladin is equipped with a so called “anti-
islanding safety device”. It ensures immediate
switch off in case of grid failure. European countries
maintain different regulations with regard to anti-
islanding devices and the supply of energy back to
the utility grid in general. Check from the part
number on the type number plate whether the
version of the Soladin is appropriate to be
connected to the local utility grid. Refer to table 1.
Never connect the Soladin to a utility grid which is
not suitable for the use of the apparatus!
In the Netherlands only one Soladin may be
connected to an existing electricity branch circuit
which is fused with 16 Amp. In other countries
different restrictions apply. Please acquaint yourself
with the local regulations on this issue.
During installation you can check by means of the
LED-indicator whether the installation is done
properly. This check can only be carried out when
sufficient irradiation is present. Installation should
therefore be carried out during daytime only.
Although the Soladin is protected against wrong
polarity, the positive (+) and negative (–) of the solar
connections should not be exchanged.
Install the product according to the instructions
stated on page 4 and 5.
Monitoring
The Soladin has a communication port that can be
connected to the COM-port (RS232) of a PC or
laptop. Use the optional “Mastervolt PC–link”
interface and cable to set up a connection.
Part number Description
130391030 PC-link Soladin 600,
incl. communication cable, 2m
Part
number
Description Allowed to be used in:
130000600 Soladin 600 230V/50Hz QNS - EU Europe, except Germany and the countries mentioned
below
130000630 Soladin 600 230V/50Hz QNS - IT Italy
130000650 Soladin 600 230V/50Hz QNS - ES Spain
130000660 Soladin 600 230V/50Hz QNS - UK England
Table 1
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Soladin 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Soladin 600 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info