785603
13
Zoom out
Zoom in
Previous page
1/120
Next page
13
EN / AC Power Analyser / February 2011
Menu Description Default Range
Events
Event 1 source Select an event to serve as Event 1. Range:
Disabled, MPC reduce, MPC stop, Load 20%, 40%,
60%, 80%, 100%, AC present, Voltage low, Voltage
high, Current high, Frequency low, Frequency high.
Disabled See description (left).
Event 1 target Select a device in your system to perform the task if
Event 1 takes place.
Select… System dependent.
Event 1 command Select a command, depending on the device you chose. Select… System dependent.
Event 1 data  Off Off, On, Copy, Copy Invert, Toggle
Event 2 to 63 
AC present AC voltage present and within the voltage and frequency limits set (section 6.1)
Voltage low AC voltage under low limit set (section 6.1)
Voltage high AC voltage over high limit set (section 6.1)
Current high AC current over high limit set (section 6.1)
Frequency low AC frequency under low limit set (section 6.1)
Frequency high AC frequency over high limit set (section 6.1)
MPC reduce Maximum Power Control event to reduce power
MPC stop Maximum Power Control event to disconnect power
Load 20%, 40%, 60%, 80%, 100% Load is 20, 40, 60, 80 or 100 % of maximum current
Inverter control Inverter state control, inverter mode
Relay (name) Shore relay state (with name entered), shore mode
Relay (name) Generator relay state (with name entered), generator mode
MASTERBUS FUNCTIONS
6.2 AC POWER ANALYSER EVENT SOURCE LIST
6.3 AC POWER ANALYSER EVENT TARGET LIST
6.4 MASTERBUS EVENT DATA
Input
Output
On
Off
Copy
Toggle
Copy
Invert
Figure 9: Event data

Input (pulses)
The input can be achieved by operating an on/off
switch.
Output (data)
On
Off
Copy lets the status follow the input.
Copy Invert lets the status follow the opposite of the
input. Copy is used for dimming too by holding the
pulse switch pressed for a longer time.
Toggle
at the second signal. It is used in combination with a
pulse switch.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt AC Power Analyser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt AC Power Analyser in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info