785603
15
Zoom out
Zoom in
Previous page
1/120
Next page
15
EN / AC Power Analyser / February 2011
INSTALLATION

as follows:
1. Mount the AC Power Analyser to the wall, using the
dimensions drawing for drilling holes.
2. Connect the MasterBus cables and connect your
MasterBus display.

inverter (if applied). Figure 11 shows which pin
provides which signal.
123456
Common
Switch On
LED On
LED Fail
NC
NC
Figure 11: RJ 12 connector with pin signals
4. Mount the current coil on an isolated and protected
place as close as possible to the main AC
distribution.
5. Feed the phase line (L) of the AC installation through
the current coil.
6. Connect the wires of the current coil to connector 2

possible!
7. Integrate a fuse that is appropriate for your cabling,
in both AC wires and connect the AC cables to the

cover, included in the package.
8. Optional: connect a maximum 5A coil current

9. Do the primary setup, using your MasterBus display
or PC.
WARNING
Make sure that the wires of the current coil
are always connected when the electrical
system is in operation. Else high voltages
may exist on these wires!
WARNING
Danger of touching live AC wiring! Always use
the included AC plug with cover to prevent this!
7.3 MASTERBUS POWERING
At least one in three MasterBus devices must
be MasterBus powering. If AC is available at the

MasterBus powering.
7.4 COMMISSIONING
Check if all wiring is OK. Then:
(Re)connect the AC Power Analyser AC input.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt AC Power Analyser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt AC Power Analyser in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info