671530
7
Zoom out
Zoom in
Previous page
1/13
Next page
FRONT PANEL FUNCTIONS (CONT.) FRONT PANEL FUNCTIONS (CONT.)
17. MOD (CONT.)
ENGLISH ENGLISH
17. MOD
MOD is short for Modulation. Modulation FX in a conventional setup can be in stompbox
or rack form and often connect via an amplier’s FX loop:
MODULATION FX
A:>>|<<
MODULATION FX
A:>>|<<
18. DEL
DEL is short for Delay. Delay FX in a conventional setup can be in stompbox or rack form
and often connect via an amplier’s FX loop. When you select DEL the switch’s LED will
remain lit red for two seconds before ashing to indicate the current Delay tempo. CODE’s
Delay FX are:
Studio
Studio Delay is a high delity delay line. Its longer delay time enables you to layer
what you play in up to 4 second loops. Studio Delay’s editable parameters are:
DELAY TYPES
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Frequency 0 - 10 Adjusts the amount of higher frequency content in the
Delay repeats.
Level 0 - 10 Adjusts the level of the Delay effect.
A:>>|<<
PARAMETER VALUE RANGE DESCRIPTION
Mode CLS & VIB Classic Chorus & Vibrato.
Speed 0 - 10 Controls the rate of the Chorus or Vibrato effect.
Depth 0 - 10 Adjusts the depth of the Chorus or Vibrato effect.
Tone 0 - 10 Boosts or cuts high & low frequency content in the
sound.
Flanger
Flanger can produce Chorus-like sounds, but is more vivid and is harmonically more
complex. It can create weird and wonderful sonic textures, like ‘jet plane’ Doppler FX
and resonant metallic whooshes. Flanger’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Mode JET & MET Jet Flanger & Metallic Flanger.
Speed 0 - 10 Controls the rate of the Flanger effect.
Depth 0 - 10 Adjusts the depth of the Flanger effect.
Regeneration 0 - 10 Adjusts the amount of signal that is fed back to the
effect input, which makes the Flanger effect sharper.
PARAMETER VALUE RANGE DESCRIPTION
Mode CLS & VBE Classic Phaser & Vibe.
Speed 0 - 10 Controls the rate of the Phaser or Vibe effect.
Depth 0 - 10 Adjusts the depth of the Phaser or Vibe effect.
Regeneration 0 - 10 Adjusts the amount of signal that is fed back to the
effect input, which makes the Phaser effect sharper.
Tremolo
The cool sounding Tremolo effect is created by the signal amplitude being modulated
up and down. Tremolo can produce a variety of sonic characteristics from delicate
shimmer to heavy Tremolo throb. Tremolo’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Mode VLV & SQR Valve Tremolo & Square Wave Tremolo.
Speed 0 - 10 Controls the rate of Tremolo oscillation.
Depth 0 - 10 Adjusts the depth of the Tremolo effect.
Skew -50 to +50 Adjusts the shape of the waveform that is performing
the amplitude modulation. The variation of the wave
shape across the value range moves between vintage
and modern sounding Tremolo.
Chorus
Chorus and Vibrato FX apply a subtle pitch variation to the guitar signal taking your
sound from shimmering, delicate undulations to full on wobble. This can add depth
and width to clean sounds and fatten up solos. Chorus’s editable parameters are:
Phaser
Phaser uses all-pass lters to shift the guitar signal very slightly. Modulating the
shifted, or phased, signal in relation to the original signal produces the classic Phaser
sound - great for tight funky lines, sweeps and swells. Phaser’s editable parameters
are:
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Code 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 50 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marshall Code 50

Marshall Code 50 User Manual - English, German, French, Spanish - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info