671530

Marshall Code 50 Manual

11
Zoom out
Zoom in
Previous page
1/13
Next page
BLUETOOTH
Pressing REV and POWER Section Switches together (#19 & #20 in this manual) accesses
the Bluetooth
®
pairing function:
• The display screen will show ‘Bluetooth, pairing enabled’ and your CODE amplier’s
pairing ID.
• The blue LED on EXIT/STORE (# 22 in this manual) will ash while pairing.
• When paired, the blue LED will stop ashing and remain lit.
• When streaming audio, use the MASTER volume control or your music player to set the
volume level.
The Marshall Gateway™ App enables you to control your CODE amplier remotely and
access Marshall Gateway using your iOS/Android device. Download Marshall Gateway
now from the App Store or Google Play.
ENGLISH ENGLISH
STORING A PRESET (CONT.)
To rename the edited Preset and store to the current location:
• While the Preset name auto-scrolls to the left, press & hold EXIT/STORE again briey
until the Preset name is displayed with arrows above and below the rst letter or
character.
• Turn the EDIT selector to change the letter or character.
• Turn the PRESET selector to move to the next letter or character, or back to a previous
letter or character.
• Repeat until you have renamed the Preset.
The Section Switches act as naming shortcuts:
PRE FX
AMP
MOD
DEL
REV
POWER
CAB
Clear
Number
Upper / Lower Case A
Upper / Lower Case
Space
Backspace
Cancel
NAMING SHORTCUTS
• To complete the store process, press & hold EXIT/STORE once more until STORED
appears on the display screen. Your edited Preset has now been stored to CODE’s
memory.
EDITING A PRESET
• Hold down the Section Switch that you
wish to edit (#15 - #21 in this manual).
• The display screen will then show the
current section’s settings.
• Turn the EDIT selector to scroll through
the different options within the current
section: CL DSL, Plexi, JCM800, OD Silver
Jubilee in AMP, or Chorus, Flanger,
Phaser, Tremolo in MOD, or Studio,
Vintage, Multi, Reverse in DEL, for
example.
• Push the EDIT selector to begin editing.
• Turn the EDIT selector to edit the
highlighted parameter. You will see the
parameter value change on the screen as
you turn.
• When you are happy with your edited
parameter value, push the EDIT selector
to move to the next parameter (if there
is one).
• Turn the EDIT selector to edit the newly
highlighted parameter.
• Repeat for all parameters and parameter
values of the Sections that you wish to
edit.
• When you are happy with your edited
Preset you can store it to your CODE
amplier’s memory.
• If you wish exit without storing your edits,
press EXIT/STORE (# 22 in this manual).
This will return you to the main Preset
screen.
STORING A PRESET
To store an edited Preset, Store an edited Preset to a new location, and to rename an
edited Preset:
• When you have nished editing, press & hold EXIT/STORE briey until the Preset name
begins to auto-scroll to the left into the Preset number.
• If you wish to store your edited Preset to another location, turn the PRESET selector to
nd a new location, then press & hold EXIT/STORE until STORED appears on the display
screen.
Speaker cabinet models are not
editable.
!
To learn how to store an edited Preset,
refer to STORING A PRESET in this
manual.
!
If you wish to keep your edited settings
ensure that you store before moving off
that Preset.
!
Be sure that you want to store to the Preset location that you have selected, as the Preset
in that location will be overwritten.
!
Audio streamed via Bluetooth will bypass CODE’s panel features, with the exception of
MASTER volume.
!
To edit PRE FX, AMP, MOD, DEL, REV, POWER and CAB section settings:
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Code 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 50 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marshall Code 50

Marshall Code 50 User Manual - English, German, French, Spanish - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info