494328
7
Zoom out
Zoom in
Previous page
1/11
Next page
37
A
Fitting to a distribution box.
38
Connecting the power cord for use in a wall socket
If you wish to connect the RFIX35 to a wall socket, you must
connect the power cord provided.
To connect the power cord to the RFIX35, follow the steps
below.
Remove the cover of the RFIX35 by loosening the screw
at the top.
Use a Stanley knife to carefully cut open the recess on the
narrow side of the mounting plate so that the power cord
can be fed through.
Fit live and neutral to the connector and feed the cable
through the cable channel in the mounting plate.
Firmly tighten the cover of the RFIX35 to the mounting
plate again.
Assembly
(cont'd.)
39
Connecting of the power cord.
40
Standard or RF-secured mode
The RFIX35 can operate in
RF-secured mode
or standard mode (default).
Remote control RFIX35
Standard mode
RF-secured mode
Standard mode
RF-secured mode
41
Standard mode
In the standard mode the RFIX35 is compatible with existing
remote controls. In this mode the user must press separately
the address number and the command on the remote control.
The RFIX35 will receive the RF signals from the remote control
(an address with a command) and transmit it over the power
line to activate actuators or start macros.
RF-secured mode
In the RF-secured mode only commands from linked remote
controls will be accepted. Commands from other remote
controls within the receiving reach of the RFIX35 will be
ignored. To be able to use the RF-secured mode you will need
a remote control containing RF-security code. Up to 8 different
remote controls can be linked. Remote controls that are suitable
for RF-secured are the Marmitek X-10 ABX1 and the ABX3.
42
Receiving modes
Note: The default setting of the RFIX35 is letter
code "A" in the standard mode. In this mode, the
RFIX35 will accept commands on the same letter
code from other remote controls that are within
the range of the RFIX35. If you select letter code
"P" in the standard mode, the RFIX35 will also
accept commands from the other letter codes
within the range. As a result, third parties can
operate your lighting and equipment connected to
Marmitek X-10 Home. If you want to avoid this,
you must program the remote controls to the RF-
secured mode.
!
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek RFIX35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek RFIX35 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info