Manual Marmitek MT20 (page 14 of 112) (English, German, Dutch, French, Italian, Spanish)

494266

Zoom out

Zoom in

1/112

If you try to set an on or off time and the memory is full, the display will read FULL. To

clear this, press the Clear button.

Setting a timed event to occur Once only

If (within 4 seconds after setting an On or Off time) you press the “Mode” button

once or twice until Once shows in the display, you will modify the program for that

particular Unit Code to occur only Once.

The event you have programmed will happen (at the time you have programmed)

within the next 24 hours, and will then be automatically cleared from memory and

will not happen again the next day.

You can mix Once and Daily events for the same Unit Code (up to the 64 maximum

events for all 8 unit codes).

Setting a timed event to occur in the “Security” mode

If you advance to a specific time, and then press one of the ON or OFF buttons, you

will set an On or Off time for that Unit Code to occur every day at exactly the same

time.

If however, within 4 seconds after setting an On or Off time, you press the “Mode”

button once or twice until Security is shown in the display, you will modify the

program for that particular Unit Code to occur every day at a slightly different time

each day.

The event you have programmed will happen at the time you have programmed on

the first day, and will then happen at a different time on each subsequent day (within

the hour you have programmed). For example:

If you advance to 7:35 PM, press the ON button for number 2 and then (within 4

seconds) press the Mode button once or twice until Security shows in the display, the

Module(s) set to Unit Code number 2 will go On at exactly 7:35 PM on the first day

and any time between 7:00 PM and 8:00 PM every day after that. This time will vary

each day so that the Module doesn’t go on at the same time each day (to give your

home a lived-in look).

You can mix Once, Daily, and Security events for the same Unit Code (up to the 64

maximum events for all 8 unit codes). See note at bottom of Setting something to

happen every day at the same time

Reviewing timer events

Set the Mode Switch in the “Prog Set/Review” position. If no

events exist in memory 0:00 is displayed, otherwise the first event

found in memory is displayed.

If (while in Prog/Review Mode) one of the 4 module ON (or OFF)

buttons is pressed without modifying the current time, and no events are in

memory for that module, 0:00 is displayed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MT20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek MT20 Manual

Product: